A_D_converter_with_sample_and_hold_circuit_for_bipolar_operation±5_volts

Published:2009/7/20 4:14:00 Author:Jessie | From:SeekIC

A/D converter with sample-and-hold circuit for bipolar operation,±5 volts. For ±2.5-volt operation jumper pins 22 and 25 with the connections shown. For ±10-volt operation change the jumper at pin 29 from pin 24 to pin 25 and leave all otters as shown (courtesy Datel Systems, Inc.).



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/A-D_D-A_Converter_Circuit/A_D_converter_with_sample_and_hold_circuit_for_bipolar_operation±5_volts.html

Print this Page | Comments | Reading(3)