Published:2011/6/8 4:38:00 Author:Lucas | Keyword: High voltage , static generator | From:SeekIC
The high voltage static generator circuit is composed of the power switch S, power transformer T, rectifier diodes VD1 ~ VD9, capacitors C1 ~ C9, resistors R1 ~ R4, voltmeter PV and ammeter PA, and the circuit is shown as the chart. R1 ~ R4 select 1W high-voltage resistors. C1 ~ C9 select high voltage ceramic capacitors with the voltage in 30kV. VD1 ~ VD9 select silicon rectifier stack with the voltage in 30kV (it also can replaced by two silicon rectifier stacks connected in series with the voltage in 18 ~ 20KV)such as the model of 2CGL30, 2DGL30. PV chooses 0 ~ 100kV high-voltage voltmeter. PA selects 0 ~ 100A current meter. S uses 220V bipolar switch with the contact current capacity being greater than 5A.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Basic_Circuit/High_voltage_static_generator_circuit_diagram_1.html
Print this Page | Comments | Reading(3)
Code: