Published:2011/11/14 2:32:00 Author:May | Keyword: Two transistors , diode, clamping, single end, normal shock converter | From:SeekIC
The following diagram is the clamping single-end normal shock converter circuit with two transistors and diode. VT1 and VT2are energized by PWM pulse and broken over and cut off at the same time. When they are cut off, polarity on N1 is reversing, diodes VD3 and VD4 are broken over, the potential is clamped. So, when VT1, VT2 are cut off, the voltage amplitude added between collectors are equal to input voltage Ui.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Electrical_Equipment_Circuit/The_clamping_single_end_normal_shock_converter_circuit_with_two_transistors_and_diode.html
Print this Page | Comments | Reading(3)
Code: