RING_TYPE_OSCILLATOR

Published:2009/7/15 23:47:00 Author:Jessie | From:SeekIC

After core-setting current is removed, pulse output of Q1 is followed by output of Q2 after delay of 100 microsec to 3 sec, depending primarily on input voltage and core size. No separate drive oscillator is required when used as ring counter.-J. M. Marzolf, Magnelic-Core Ring Counter Needs No Drive, Electronics, 35:12, p 52-53.



Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Oscillator_Circuit/RING_TYPE_OSCILLATOR.html

Print this Page | Comments | Reading(3)