Published:2012/9/9 20:51:00 Author:Ecco | Keyword: Ultra Low Current, Oscillator | From:SeekIC
Here is a challenge. Design an astable oscillator which draws only a few nanoamps of current from a +3v supply. I gave this some thought and came up with the circuit below. I used some pretty standard parts except for three surface mounted 1000M resistors I had on hand. The oscillator frequency measured a low 1Hz frequency and the average current was a very low 3 nanoamps. If I had some higher resistors values handy, I think I could have gotten the current down below one nanoamp.
Source: discovercircuits
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Oscillator_Circuit/Ultra_Low_Current_Oscillator_February_17_2009.html
Print this Page | Comments | Reading(3)
Code: