Published:2011/11/27 20:49:00 Author:Ecco | Keyword: pulse generator , multiple waveforms | From:SeekIC
It uses the programmable unijunction transistor Th to form a pulse waveform generator circuit which can output multiple waveforms. Figure (b) shows the pulse waveforms output by a, b, c, d points which are shown in Figure (a) circuit. In this case, UB = 50V, pulse frequency f = 1000Hz, pulse peak U = UP = 20V. Component parameters R1 = 0.164MΩ, R2 = 0.256MΩ, R3 = 4.9MΩ, R4 or R5 = 8Ω, C = 410pF.
Reprinted Url Of This Article:
http://www.seekic.com/circuit_diagram/Signal_Processing/Pulse_Signal_Generator/The_pulse_generator__Figure_16__circuit_with_output_multiple_waveforms.html
Print this Page | Comments | Reading(3)
Code: