LPC2880;

·ARM7TDMI processor with 8 kB cache, operating at up to 60 MHz
·1 MB on-chip flash program memory with 128-bit access for high performance
·64 kB SRAM
·Boot ROM allows execution of flash code, external code, or flash programming via USB
·On-chip DC-to-DC converter can generate all required voltages from a single battery
or from USB power
·Multiple internal buses allow simultaneous simple DMA, USB DMA, and program execution from on-chip flash without contention
·External memory controller supports flash, SRAM, ROM, and SDRAM
·Advanced Vectored Interrupt Controller, supporting up to 30 vectored interrupts
·Innovative Event Router allows interrupt, power-up, and clock-start capabilities from up to 107 sources
·Multi-channel GP DMA controller that can be used with most on-chip peripherals as well as for memory-to-memory transfers
·Serial interfaces:
·Hi-Speed USB 2.0 device (480 Mbit/s or 12 Mbit/s) with on-chip physical layer
·UART with fractional baud rate generation, flow control, IrDA support, and FIFOs
·I²C-bus interface
·I²S-bus (Inter IC Sound bus) interface for independent stereo digital audio input and output
·SD/MMC memory card interface
·10-bit A/D converter with 5-channel input multiplexing
·16-bit stereo A/D and D/A converters with amplification and gain control
·Advanced clock generation and power control reduce power consumption
·Two 32-bit timers with selectable prescalers
·8-bit/4-bit LCD interface bus
·Real Time Clock can be clocked by 32 kHz oscillator or another source
·Watchdog Timer with interrupt and/or reset capabilities.