ASM-12.0MHZ, ASM1232LP, ASM1232LP-2 Selling Leads, Datasheet
MFG:ASM Package Cooled:DIP D/C:04+
ASM-12.0MHZ, ASM1232LP, ASM1232LP-2 Datasheet download

Part Number: ASM-12.0MHZ
MFG: ASM
Package Cooled: DIP
D/C: 04+
MFG:ASM Package Cooled:DIP D/C:04+
ASM-12.0MHZ, ASM1232LP, ASM1232LP-2 Datasheet download

MFG: ASM
Package Cooled: DIP
D/C: 04+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: ASM
File Size: 303556 KB
Manufacturer: Abracon Corporation
Download : Click here to Download
PDF/DataSheet Download
Datasheet: ASM1232LP
File Size: 283176 KB
Manufacturer: ALSC [Alliance Semiconductor Corporation]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: ASM
File Size: 303556 KB
Manufacturer: Abracon Corporation
Download : Click here to Download
The ASM1232LP/LPS is a fully integrated microprocessor supervisor. It can halt and restart a "hung-up" microprocessor,restart a
microprocessor after a power failure. It has a watchdog timer and external reset override. A precision temperature-compensated
reference and comparator circuits monitor the 5V, VCC input voltage status.
During power-up or when the VCC power supply falls outside selectable tolerance limits, both RESET and RESET become active.
When VCC rises above the threshold voltage, the reset signals remain active for an additional 250ms minimum,allowing the power
supply and system microprocessor to stabilize. The trip point tolerance signal, TOL, selects the trip level tolerance to be either 5% or 10%.
Each device has both a push-pull, active HIGH reset output and an open drain active LOW reset output. A debounced manual reset
input, PBRST , activates the reset outputs for a minimum period of 250ms.
There is a watchdog timer to stop and restart a microprocessor that is "hung-up". The watchdog timeouts periods are selectable:
150ms, 610ms and 1200ms. If the ST input is not strobed LOW before the time-out period expires, a reset is generated.
Devices are available in 8-pin DIP, 16-pin SO and compact 8-pin MicroSO packages.
| Parameter | Min | Max | Unit |
| Voltage on VCC | -0.5 | 7 | V |
| Voltage on ST , TD | -0.5 | VCC + 0.5 | V |
| Voltage on PBRST , RESET, RESET | -0.5 | VCC + 0.5 | V |
| Operating Temperature Range (N suffixed devices) | -40 | +85 | °C |
| Operating Temperature Range (others) | 0 | 70 | °C |
| Soldering Temperature (for 10 sec) | +260 | °C | |
| Storage Temperature | -55 | +125 | °C |
| ESD rating HBM MM |
2 200 |
KV V |

