AT76C651, AT76C651B, AT76C712 Selling Leads, Datasheet
MFG:ATMEL Package Cooled:TQFP D/C:00+
AT76C651, AT76C651B, AT76C712 Datasheet download
Part Number: AT76C651
MFG: ATMEL
Package Cooled: TQFP
D/C: 00+
AT76C651, AT76C651B, AT76C712
- Table of contents:
Info of AT76C651
Info of AT76C651B
Info of AT76C712
Attentive hint
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
Top Sellers:
TOP
About AT76C651AC
PDF/DataSheet Download
Datasheet: AT76C651AC
File Size: 436033 KB
Manufacturer:
Download : Click here to Download
About AT76C651B
PDF/DataSheet Download
Datasheet: AT76C651B
File Size: 84250 KB
Manufacturer: ATMEL [ATMEL Corporation]
Download : Click here to Download
About AT76C712
PDF/DataSheet Download
Datasheet: AT76C712
File Size: 122523 KB
Manufacturer: ATMEL [ATMEL Corporation]
Download : Click here to Download
AT76C651 General Description
A DVB-compliant Quadrature Amplitude Modulation (QAM) demodulation circuit which can be used in DVB and other applications using Quadrature Phase Shift Keying (OPSK) or QAM transmission systems. The AT76C651B uses direct IF sampling or baseband input from an external source.
AT76C651 Maximum Ratings
| Symbol | Parameter | Conditions | Min | Max | Unit |
| VDD3 | DC supply voltage | Core and standard I/Os | -0.3 | 4.6 | V |
| VI | DC input voltage, 3.3V I/Os | -0.3 | VDD3 + 0.3, 4.6 max | V | |
| DC input voltage, 5V I/Os | -0.3 | VDD5 + 0.3, 5.5 max | V | ||
| VO | DC output voltage, 3.3V I/Os | -0.3 | VDD3 + 0.3, 4.6 max | V | |
| DC output voltage, 5V I/Os | -0.3 | VDD5 + 0.3, 5.5 max | V | ||
| TEMP | Operating free air temperature range | Commercial | 0 | +70 | °C |
AT76C651 Connection Diagram
AT76C651B General Description
A DVB-compliant Quadrature Amplitude Modulation (QAM) demodulation circuit which can be used in DVB and other applications using Quadrature Phase Shift Keying (OPSK) or QAM transmission systems. The AT76C651B uses direct IF sampling or baseband input from an external source.
AT76C712 General Description
Atmel's AT76C712 is a low-power USB peripheral that can connect various types of devices to a common USB port.
• The device is based on the AVR-enhanced RISC architecture core, which combines an advanced instruction set with 32 general-purpose working registers. By executing powerful instructions in a single clock cycle, the AT76C712 achieves throughputs approaching 1MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed
• The clock generation circuit requires a clock input of 12 MHz and provides standard clock rates for the USB module and the on-chip UARTs, as well as several AVR CPU rates varying from 16 MHz up to 48 MHz
• Internal DMA channels allow fast data transfers between the USB buffers and the external and on-chip memory without processor interruption. USB DMA transfers use devoted data paths with a 12 Mbytes transfer rate
• An on-chip flexible memory controller allows dynamic memory mapping and provides the required timing for interfacing with slow or fast external memory devices, like SRAM or FIFOs
• Twenty-five multipurpose I/O pins provide the signals for the external interfaces. The device also offers two external interrupts, a programmable Watchdog Timer, flexible timer/counters with compare modes, and the support of various power-down modes
• On power-up, the bootstrap code is executed from the boot ROM. The purpose of the bootstrap code is to load the application code into the program memory. The application code is executed from the on-chip SRAM program memory contributing to the low-power consumption. Different programming modes are supported depending on the application (that is, the mode is selected externally by the PMODE0 and PMODE1 pins)
• In the slave programming mode, an external system (that is, the Host), operating as SPI master, can transfer the program image in a raw format to the program memory of the device. In this case, the device operates as an SPI slave and starts running from the internal boot ROM code, which switches to the start of program memory when it detects the end of a valid program transfer from the Host to the AT76C712 (see the "Slave Programmming Mode" on page 9)
• In a master programming mode, the AT76C712 reads the whole program image from an external SPI EEPROM or DataFlash and switches to the start of program memory when it completes the reading (see the "Master Program-ming Modes" on page 10). Alternatively, the AT76C712 reads only configuration parameters from a small serial non-volatile memory (EEPROM or DataFlash), enables the USB Controller, and executes the USB Device Firmware Upgrade (DFU) code that is
stored in the boot ROM
• The USB Controller consists of a Serial Interface Engine (SIE), a Function Interface Unit (FIU), and a System Interface (SI). The SIE performs bit processing, line coding, packet generation and packet type recognition, serial-parallel data conversion, and packet delineation. The FIU consists of a protocol engine and a USB device with one Control Endpoint (EP0) and seven programmable Endpoints with up to 512 bytes maximum total size. All Endpoints support double buffering in order to provide the maximum performance specified for the USB
• The device supports two 16550 UART modules with 16 bytes FIFOs in each direction. UART0 serial interface provides full modem control functionality with the RTS/CTS, DTR/DSR, RI, and CD signals. These signals are provided by the general-purpose I/O pins of PORTD
• The AT76C712 AVR is supported with a full suite of program and system development tools including: C compiler, macro assemblers, program debugger/simulators, in-circuit emulators, and evaluation kits
• The device is based on the AVR-enhanced RISC architecture core, which combines an advanced instruction set with 32 general-purpose working registers. By executing powerful instructions in a single clock cycle, the AT76C712 achieves throughputs approaching 1MIPS per MHz, allowing the system designer to optimize power consumption versus processing speed
• The clock generation circuit requires a clock input of 12 MHz and provides standard clock rates for the USB module and the on-chip UARTs, as well as several AVR CPU rates varying from 16 MHz up to 48 MHz
• Internal DMA channels allow fast data transfers between the USB buffers and the external and on-chip memory without processor interruption. USB DMA transfers use devoted data paths with a 12 Mbytes transfer rate
• An on-chip flexible memory controller allows dynamic memory mapping and provides the required timing for interfacing with slow or fast external memory devices, like SRAM or FIFOs
• Twenty-five multipurpose I/O pins provide the signals for the external interfaces. The device also offers two external interrupts, a programmable Watchdog Timer, flexible timer/counters with compare modes, and the support of various power-down modes
• On power-up, the bootstrap code is executed from the boot ROM. The purpose of the bootstrap code is to load the application code into the program memory. The application code is executed from the on-chip SRAM program memory contributing to the low-power consumption. Different programming modes are supported depending on the application (that is, the mode is selected externally by the PMODE0 and PMODE1 pins)
• In the slave programming mode, an external system (that is, the Host), operating as SPI master, can transfer the program image in a raw format to the program memory of the device. In this case, the device operates as an SPI slave and starts running from the internal boot ROM code, which switches to the start of program memory when it detects the end of a valid program transfer from the Host to the AT76C712 (see the "Slave Programmming Mode" on page 9)
• In a master programming mode, the AT76C712 reads the whole program image from an external SPI EEPROM or DataFlash and switches to the start of program memory when it completes the reading (see the "Master Program-ming Modes" on page 10). Alternatively, the AT76C712 reads only configuration parameters from a small serial non-volatile memory (EEPROM or DataFlash), enables the USB Controller, and executes the USB Device Firmware Upgrade (DFU) code that is
stored in the boot ROM
• The USB Controller consists of a Serial Interface Engine (SIE), a Function Interface Unit (FIU), and a System Interface (SI). The SIE performs bit processing, line coding, packet generation and packet type recognition, serial-parallel data conversion, and packet delineation. The FIU consists of a protocol engine and a USB device with one Control Endpoint (EP0) and seven programmable Endpoints with up to 512 bytes maximum total size. All Endpoints support double buffering in order to provide the maximum performance specified for the USB
• The device supports two 16550 UART modules with 16 bytes FIFOs in each direction. UART0 serial interface provides full modem control functionality with the RTS/CTS, DTR/DSR, RI, and CD signals. These signals are provided by the general-purpose I/O pins of PORTD
• The AT76C712 AVR is supported with a full suite of program and system development tools including: C compiler, macro assemblers, program debugger/simulators, in-circuit emulators, and evaluation kits
AT76C712 Features
• Advanced RISC Architecture, 130 Powerful Instructions, Most Single Clock Cycle Execution
• JTAG (IEEE Std. 1149.1 Compliant) Interface
Boundary-scan Capabilities According to the JTAG Standard
Extensive On-chip Debug Support
• Clock Generator Provides CPU Rates up to 48MHz
• Only One External Clock Crystal of 12 MHz Can Generate All the Required System Clocks:
Internal Clock for Standard UART Rates
A 48 MHz and 96 MHz Clock for USB Data Recovery
AVR Processor and System Clock
Full-speed USB Interface (12 Mbits per Second) 2.0 Compliant
• Two On-chip 16550 UARTs Supporting Baud Rates up to 921 Kbaud
Both UARTs Incorporate individual Transmit and Receive FIFOs of 16 Bytes
UART0 Supports Modem Control Signals
Programmable SPI Interface
• On-chip Bootstrap ROM Provides a Variety of Firmware Upgrade Modes
Device Firmware Upgrade Through USB for the internal Program SRAM (No External Non-volatile SPI Memory Required)
Device Firmware Upgrade Through USB for both the Internal Program SRAM and the External SPI DataFlash® or EEPROM
SPI Program Mode from the External DataFlash or EEPROM
• DMA Channels Allow Fast Data Transfers between Endpoint Buffers and Internal or External SRAM (DMA Transfer Rate is 12 MHz for All Channels)
• 8K x 16 bits (up to 11K x 16 bits), In-System SRAM for Program Code (Program Memory)
• On-Chip 8 Kbytes SRAM for Data and Variables ( 2, 4, and 8 Kbytes can be Remapped for Program Storage in the Address Area Above the Program Memory)
• Two 8-bit Timer/Counters
• One 16-bit Timer/Counter
• Two External interrupts Through GPIOs
• Programmable Watchdog Timer
• Low voltage operation:
1.8V for the Core
1.8V or 3.3V for the Periphery
3.3V for the USB
• Low cost 64-pin TQFP Package, Suitable for USB-to-UART Bridge Applications
• JTAG (IEEE Std. 1149.1 Compliant) Interface
Boundary-scan Capabilities According to the JTAG Standard
Extensive On-chip Debug Support
• Clock Generator Provides CPU Rates up to 48MHz
• Only One External Clock Crystal of 12 MHz Can Generate All the Required System Clocks:
Internal Clock for Standard UART Rates
A 48 MHz and 96 MHz Clock for USB Data Recovery
AVR Processor and System Clock
Full-speed USB Interface (12 Mbits per Second) 2.0 Compliant
• Two On-chip 16550 UARTs Supporting Baud Rates up to 921 Kbaud
Both UARTs Incorporate individual Transmit and Receive FIFOs of 16 Bytes
UART0 Supports Modem Control Signals
Programmable SPI Interface
• On-chip Bootstrap ROM Provides a Variety of Firmware Upgrade Modes
Device Firmware Upgrade Through USB for the internal Program SRAM (No External Non-volatile SPI Memory Required)
Device Firmware Upgrade Through USB for both the Internal Program SRAM and the External SPI DataFlash® or EEPROM
SPI Program Mode from the External DataFlash or EEPROM
• DMA Channels Allow Fast Data Transfers between Endpoint Buffers and Internal or External SRAM (DMA Transfer Rate is 12 MHz for All Channels)
• 8K x 16 bits (up to 11K x 16 bits), In-System SRAM for Program Code (Program Memory)
• On-Chip 8 Kbytes SRAM for Data and Variables ( 2, 4, and 8 Kbytes can be Remapped for Program Storage in the Address Area Above the Program Memory)
• Two 8-bit Timer/Counters
• One 16-bit Timer/Counter
• Two External interrupts Through GPIOs
• Programmable Watchdog Timer
• Low voltage operation:
1.8V for the Core
1.8V or 3.3V for the Periphery
3.3V for the USB
• Low cost 64-pin TQFP Package, Suitable for USB-to-UART Bridge Applications
MT58L64L18CT-10
Price: 4-6 USD
MT58L64L18CT-10 TQFP100
DL-7140-211M
Price: 5-6.5 USD
DL-7140-211M laser tube
74LVC74APG
Price: 4-5 USD
74LVC74APG - IC FLIP FLOP D-Type POS-EDG DUAL 14TSSOP
CY28346ZI-2
Price: 6.5-8 USD
CYPRESS - Clock Synthesizer with Differential CPU Outputs
PI5V330QEX
Price: 0.284-0.286 USD
PI5V330QEX Pericom Multiplexer Switch ICs
BSM300GA120DN2
Price: 1-2 USD
IGBT power module, Single switch, 1200 V, Collector-emitter voltage, 430A
SVA150XG04TB
Price: 1-2 USD
a-Si TFT-LCD, NEC, 228.096Hmm, 560V
PC354N1
Price: 0.124-0.2 USD
PC354N1T - Mini-flat Package, AC Input Type Photocoupler - Sharp Electrionic Components
RL1210JR-070R22L
Price: 0.177-0.178 USD
RL1210JR51-XX-BL - Thick Film Chip Resistor Low Ohmic - TAITRON Components Incorporated
STPS140A
Price: 0.053-0.055 USD
STPS140A - POWER SCHOTTKY RECTIFIER - STMicroelectronics
STA013
Price: 1.45-1.5 USD
STA013 - MPEG 2.5 LAYER III AUDIO DECODER - STMicroelectronics
SMBJ5347B
Price: 0.073-0.075 USD
SMBJ5347B - 5 Watt Surface Mount Silicon Zener Diodes - Micro Commercial Components
