Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The AT90S2333/4433 is a low-power CMOS 8-bit microcontroller based on the AVR RISC architecture. By executing powerful instructions in a single clock cycle, the AT90S2333/4433 achieves throughputs approaching 1 MIPS per MHz allowing the system designer to optimize power consumption versus processing speed.
The AVR core combines a rich instruction set with 32 general purpose working registers. All the 32 registers are directly connected to the Arithmetic Logic Unit (ALU), allowing two independent registers to be accessed in one single instruction executed in one clock cycle. The resulting architecture is more code efficient while achieving throughputs up to ten times faster than conventional CISC microcontrollers.
The AT90S2333/4433 provides the following features: 2K/4K bytes of In-System Programmable Flash, 128/256 bytes EEPROM, 128 bytes SRAM, 20 general purpose I/O lines, 32 general purpose working registers, two flexible timer/counters with compare modes, internal and external interrupts, a programmable serial UART, 6-channel, 10-bit ADC, programmable Watchdog Timer with internal oscillator, an SPI serial port and two software selectable power saving modes.The Idle mode stops the CPU while allowing the SRAM, timer/counters, SPI port and interrupt system to continue functioning. The Power Down mode saves the register contents but freezes the oscillator, disabling all other chip functions until the next interrupt or hardware reset.
The device is manufactured using Atmel's high density nonvolatile memory technology. The on-chip Flash program memory can be reprogrammed in-system through an SPI serial interface or by a conventional nonvolatile memory programmer. By combining a RISC 8-bit CPU with In-System Programmable Flash on a monolithic chip, the Atmel AT90S2333/4433 is a powerful microcontroller that provides a highly flexible and cost effective solution to many embedded control applications.
The AT90S2333/4433 AVR is supported with a full suite of program and system development tools including: C compilers, macro assemblers, program debugger/simulators, in-circuit emulators, and evaluation kits.
AT90LS2333 Features
• High-performance and Low-power AVR® 8-bit RISC Architecture 118 Powerful Instructions - Most Single Cycle Execution 32 x 8 General Purpose Working Registers Up to 8 MIPS Throughput at 8 MHz • Data and Nonvolatile Program Memory 2K/4K Bytes of In-System Programmable Flash Endurance 1,000 Write/Erase Cycles 128 Bytes of SRAM 128/256 Bytes of In-System Programmable EEPROM Endurance: 100,000 Write/Erase Cycles Programming Lock for Flash Program and EEPROM Data Security • Peripheral Features One 8-bit Timer/Counter with Separate Prescaler Expanded 16-bit Timer/Counter with Separate Prescaler, Compare, Capture Modes and 8-, 9- or 10-bit PWM On-chip Analog Comparator Programmable Watchdog Timer with Separate On-chip Oscillator Programmable UART 6-channel, 10-bit ADC Master/Slave SPI Serial Interface • Special Microcontroller Features Brown-Out Reset Circuit Enhanced Power-on Reset Circuit Low-Power Idle and Power Down Modes External and Internal Interrupt Sources • Specifications Low-power, High-speed CMOS Process Technology Fully Static Operation • Power Consumption at 4 MHz, 3V, 25°C Active: 3.4 mA Idle Mode: 1.4 mA Power Down Mode: <1 µA • I/O and Packages 20 Programmable I/O Lines 28-pin PDIP and 32-pin TQFP • Operating Voltage 2.7V - 6.0V (AT90LS2333 and AT90LS4433) 4.0V - 6.0V (AT90S2333 and AT90S4433) • Speed Grades 0 - 4 MHz (AT90LS2333 and AT90LS4433) 0 - 8 MHz (AT90S2333 and AT90S4433)