Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The IC ATA2516 is a complete IR receiver for data communication systems. The device is developed and optimized for use in carrier frequency modulated transmission applications. Its function can be described using the block diagram in Figure 1 on page 2. The input stage meets two main functions. First, it provides a suitable bias voltage for the PIN diode. Secondly, the pulsed photo current signals are transformed into a voltage by a special circuit which is optimized for low noise application. After amplification by a Controlled Gain Amplifier (CGA), the signals pass a tuned integrated narrow bandpass filter with a center frequency f0 equivalent to the chosen carrier frequency of the input signal. The demodulator is used to convert the input burst signal to a digital envelope output pulse and to evaluate the signal information quality, i.e., unwanted pulses will be suppressed at the output pin. All this is done by means of an integrated dynamic feedback circuit which varies the gain as a function of changing environmental conditions (ambient light, modulated lamps etc.). A 7-bit digital- to-analog converter is used to adjust the gain of the controlled gain amplifier. Other special features serve to adapt to the current application to secure best transmission quality. The ATA2516 operates in a voltage supply range of 4.5 V - 5.5 V.
ATA2516 Maximum Ratings
Parameters
Symbol
Value
Unit
Supply voltage
VS
-0.3 to 6
V
Supply current (DC current IIN_DC = 0)
IS
0.5
mA
Input voltage
VIN
-0.3 to VS
V
Input DC current at VS = 5 V
IIN_DC
0.8
mA
Output voltage
VO
-0.3 to VS
V
Operating temperature
Tamb
-40 to +85
°C
Storage temperature
Tstg
-40 to +125
°C
Power dissipation at Tamb = 25°C
Ptot
10
mW
ATA2516 Features
• Supply Voltage: 4.5 V to 5.5 V • Automatic Sensitivity Adaptation (AGC) • Automatic Strong Signal Adaptation (ATC) • Carrier Frequency is 56 kHz; Adjusted by Zener Diode Fusing ±4% • TTL and CMOS Compatible