Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The CM431 is a three-terminal adjustable shunt voltage regulator with specified thermal stability and pin-to-pin compatible with the earlier 431 series. The output voltage can be adjusted to any value between VREF and 36V by using two external resistors. The CM431 offers low output impedance for improved load regulation with a typical output impedance of 200m. Because of the active output circuitry, the CM431 can replace the zener diodes in applications such as switching power supplies, OVP crowbar circuits, references for A/D, D/A converters with improved turn-on characteristics.
CM431 Maximum Ratings
Cathode to Anode Voltage (VKA) (Note 2)
-0.3V to 37V
Continuous Cathode Current (IK)
-100mA to 150mA
Reference Input Current (IREF)
-50uA to 10mA
Maximum junction temperature range, TJ
150
Storage temperature range
-65 to 150
Lead temperature (soldiering, 10 seconds)
260
Note 1: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground.
Currents are positive into, negative out of the specified terminal.
Note 2: Voltage values are with respect to the anode terminal unless otherwise noted.
CM431 Features
` Initial voltage reference accuracy of 1.0%. ` Sink current capability from 1mA to 100mA ` Typical output dynamic impedance less than 200m; ` Adjustable output voltage from VREF to 36V ` Available in SOT-23, SOT-89, TO-92, & SOP-8 ` Low output noise ` Typical equivalent full range temperature coefficient of 30ppm/ OC
CM431 Typical Application
· Voltage Reference · Precision shunt regulator · High current shunt regulator · PWM down converter with reference · Voltage monitor
CM431 Connection Diagram
CM431255 Parameters
Technical/Catalog Information
CM431255
Vendor
Powerex Inc
Category
Discrete Semiconductor Products
Structure
Series Connection - All SCRs
Number of SCRs, Diodes
1 SCR, 1 Diode
Voltage - Off State
1200V
Current - On State (It (RMS)) (Max)
86A
Current - On State (It (AV)) (Max)
55A
Current - Gate Trigger (Igt) (Max)
100mA
Current - Hold (Ih) (Max)
-
Current - Non Rep. Surge 50, 60Hz (Itsm)
1000A, 1100A
Mounting Type
Chassis Mount
Package / Case
POW-R-BLOK? Module
Packaging
Bulk
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
CM431255 CM431255
CM431255 General Description
Powerex Dual SCR POW-R-BLOK™ Modules are designed for use in applications requiring phase control and isolated packaging. The modules are isolated for easy mounting with other components on common heatsinks.
CM431255 Maximum Ratings
Characteristic
Symbol
CM431255
CM431655
Units
Peak Forward Blocking Voltage
VDRM
1200
1600
Volts
Transient Peak Forward Blocking Voltage (Non-Repetitive), t < 5ms
VDSM
1350
1700
Volts
DC Forward Blocking Voltage
VD(DC)
960
1280
Volts
Peak Reverse Blocking Voltage
VRRM
1200
1600
Volts
Transient Peak Reverse Blocking Voltage (Non-Repetitive), t < 5ms
VRRM
1350
1700
Volts
DC Reverse Blocking Voltage
VR(DC)
960
1280
Volts
RMS On-State Current
IT(RMS)
86
86
Amperes
Average On-State Current, TC = 86°C
IT(AV)
55
55
Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (60Hz)
ITSM
1100
1100
Amperes
Peak One-Cycle Surge (Non-Repetitive) On-State Current (50Hz)