CS1MP1, CS2001, CS2001T Selling Leads, Datasheet
MFG:RichTek Package Cooled:SOP-20 D/C:08+
CS1MP1, CS2001, CS2001T Datasheet download

Part Number: CS1MP1
MFG: RichTek
Package Cooled: SOP-20
D/C: 08+
MFG:RichTek Package Cooled:SOP-20 D/C:08+
CS1MP1, CS2001, CS2001T Datasheet download

MFG: RichTek
Package Cooled: SOP-20
D/C: 08+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: cs1000
File Size: 119106 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: CS2001
File Size: 84867 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: CS20
File Size: 260255 KB
Manufacturer: IXYS [IXYS Corporation]
Download : Click here to Download
The CS2001 is a smart power supply ASIC utilized in automotive airbag systems. It contains a currentmode switching regulator with a 1.2 A onchip switch and a 5.0 V, 100 mA linear regulator. The linear output capacitor must be 3.3 mF or greater with an ESR in the range of 100 mW to 1.0 W. If the ESR of the cap is less than 100 mW, a series resistor must be used. The switcher can be configured in either a boost or flyback topology. The boost topology produces energy reserve voltage VER which is externally adjustable (25 V maximum) through the resistor divider connected to the VFB pin. In the event of fault conditions that produce VFB either open or shorted, the switcher is shut down.
Under normal operating conditions (VBAT > 8.0 V), the current loading on the linear regulator is directed through VBAT. A low battery or loss of battery condition switches the supply for the linear regulator from VBAT to VER and shuts down the switcher using the ASIC's internal "smartswitch." This switchover feature minimizes the power dissipation in both the linear and switcher output devices and saves the cost of using a larger inductor.
The NERD (No Energy Reserve Detected) pin is a dual function output. If VOUT is not in regulation, it provides a Power On Reset function whose time interval is externally adjustable with the capacitor. This interval can be seen on the RESETB pin, which allows for clean powerup and powerdown of the microprocessor. Once VOUT is in regulation, the logic level of the NERD output (usually low) indicates to the microprocessor whether or not the VER pin is connected.
A switchedcapacitor voltage tripler accepts input voltage VER and produces output voltage VCHG (typically VER + 8.0 V). This voltage is used in the system to drive highside FETs.This part is capable of withstanding a 50 V peak transient voltage.The linear regulator will not shut down during this event.
|
Rating |
Value |
Unit |
| VBAT |
0.5 to 25 |
V |
| VER |
0.5 to 25 |
V |
| VOUT |
0.5 to 7.0 |
V |
| Digital Input/Output Voltage |
0.5 to 7.0 |
V |
| Peak Transient Voltage (36 V Load Dump @14V Battery Voltage) |
50 |
V |
| Storage Temperature Range |
55 to 150 |
°C |
| Junction to Free Air Thermal Impedance |
55 |
°C/W |
| ESD Susceptibility (Human Body Model) |
4.0 |
KV |
| Lead Temperature Soldering: Reflow:(SMD styles only)(Note1.) |
260 peak |
°C |
| TA |
40 to 85 |
°C |
| TJ |
40 to 150 |
°C |

