Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The CS5466 is a low cost power meter solution combining two Analog-to-Digital Converters (ADC)'s, an energy-to-frequency converter, and energy pulse outputs on a single chip. It is designed to accurately measure and calculate energy for single phase 2- or 3- wire power metering applications with minimal external components.
Low frequency energy outputs, E1 and E2, supply average real power and can be used to drive a stepper motor or a mechanical counter; the high frequency energy output FOUT can be used for calibration; and NEG indicates negative power.
The CS5466 has configuration pins which allow for direct configuration of pulse output frequency, current channel input range, and high pass filter enable option.
The CS5466 also has a power-on reset function which holds the part in reset until the supply reaches an operable level.
CS5466 Maximum Ratings
Parameter
Symbol
Min
Typ
Max
Unit
DC Power Supplies (Notes 15 and 16) Positive Digital Positive Analog
VD+ VA+
-0.3 -0.3
- -
+6.0 +6.0
V V
Input Current, Any Pin Except Supplies (Notes 17, 18, 19)
IIN
-
-
±10
mA
Output Current, Any Pin Except VREFOUT
IOUT
-
-
100
mA
Power Dissipation (Note 20)
PD
-
-
500
mW
Analog Input Voltage All Analog Pins
VINA
-0.3
-
(VA+) + 0.3
V
Digital Input Voltage All Digital Pins
VIND
-0.3
-
(VD+) + 0.3
V
Ambient Operating Temperature
TA
-40
-
85
°C
Storage Temperature
Tstg
-65
-
100
°C
Notes:15. VA+ and AGND must satisfy {(VA+) - (AGND)} + 6.0 V. 16. VD+ and AGND must satisfy {(VD+) - (AGND)} + 6.0 V. 17. Applies to all pins including continuous over-voltage conditions at the analog input pins. 18. Transient current of up to 100 mA will not cause SCR latch-up. 19. Maximum DC input current for a power supply pin is ±50 mA. 20. Total power dissipation, including all input currents and output currents.
CS5466 Features
·Single Chip; Power Measurement Solution ·Energy Data Linearity: ±0.1% of Reading over 1000:1 Dynamic Range ·On-Chip functions: Measures Energy and Performs Energy-to-Pulse Conversions ·Meets Accuracy Spec for IEC 687/1036 ·High Pass Filter Option ·Four Input Ranges for Current Channel ·On-Chip 2.5 V Reference (25 ppm/°C typ) ·Pulse Outputs for Stepper Motor or Mechanical Counter ·On-Chip Energy Direction Indicator ·Ground Referenced Input Signals with Single Supply ·High Frequency Output for Calibration ·On-Chip Power-on Reset ·Power Supply Configurations: VA+ = +5 V; AGND = 0 V; VD+ = +3.3 V to 5 V