Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The CS5521/22/23/24/28 are highly integrated Analog- to-Digital Converters (ADCs) which use chargebalance techniques to achieve 16-bit (CS5521/23) and 24-bit (CS5522/24/28) performance. The ADCs come as either two-channel (CS5521/22), four-channel (CS5523/24), or eight-channel (CS5528) devices, and include a low input current, chopper-stabilized instrumentation amplifier. To permit selectable input spans of 25 mV, 55 mV, 100 mV, 1 V, 2.5 V, and 5 V, the ADCs include a PGA (programmable gain amplifier). To accommodate ground-based thermocouple applications, the devices include a Charge Pump Drive which provides a negative bias voltage to the on-chip amplifiers.
These devices also include a fourth order modulator followed by a digital filter which provides eight selectable output word rates. The digital filters are designed to settle to full accuracy within one conversion cycle and when operated at word rates below 30 Hz, they reject both 50 and 60 Hz interference.
These single supply products are ideal solutions for measuring isolated and non-isolated, low-level signals in process control applications.
CS5524 Maximum Ratings
Parameter
SYMBOL
Min
Typ
Max
UNITS
DC Power Supplies (Note 21) Positive Digital Positive Analog
VD+ VA+
-0.3 -0.3
- -
+6.0 +6.0
V V
Negative Bias Voltage Negative Potential
NBV
+0.3
-2.1
-3.0
V
Input Current, Any Pin Except Supplies (Note 22 and 23)
IIN
-
-
±10
mA
Output Current
IOUT
-
-
±25
mA
Power Dissipation (Note 24)
PDN
-
-
500
mW
Analog Input Voltage VREF pins AIN Pins
VINR VINA
NBV -0.3 NBV -0.3
- -
(VA+) + 0.3 (VA+) + 0.3
V V
Digital Input Voltage
VIND
-0.3
-
(VD+) + 0.3
V
Ambient Operating Temperature
TA
-40
-
85
Storage Temperature
Tstg
-65
-
150
Notes: 21. No pin should go more negative than NBV - 0.3 V. 22. Applies to all pins including continuous overvoltage conditions at the analog input (AIN) pins. 23. Transient current of up to 100 mA will not cause SCR latch-up. Maximum input current for a power supply pin is ±50 mA. 24. Total power dissipation, including all input currents and output currents.
WARNING: Operation at or beyond these limits may result in permanent damage to the device. Normal operation is not guaranteed at these extremes.
CS5524 Features
·Low Input Current (100 pA), Chopper Stabilized Instrumentation Amplifier ·Scalable Input Span (Bipolar/Unipolar) - 2.5V VREF: 25 mV, 55 mV, 100 mV, 1 V, 2.5 V, 5 V - External: 10 V, 100 V ·Wide VREF Input Range (+1 to +5 V) ·Fourth Order Delta-Sigma A/D Converter ·Easy to Use Three-wire Serial Interface Port - Programmable/Auto Channel Sequencer with Conversion Data FIFO - Accessible Calibration Registers per Channel - Compatible with SPITM and MicrowireTM ·System and Self-Calibration ·Eight Selectable Word Rates - Up to 617 Hz (XIN = 200 kHz) - Single Conversion Settling - 50/60 Hz ±3 Hz Simultaneous Rejection ·Single +5 V Power Supply Operation - Charge Pump Drive for Negative Supply - +3 to +5 V Digital Supply Operation ·Low Power Consumption: 5.5 mW