Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The CS8128 contains all the necessary control circuitry to implement a 5V linear regulator. An external pass device is used to produce superior performance compared to conventional monolithic regulators. The CS8128 with a TIP42 PNP transistor typically provides a 100mV dropout voltage at 500mA, increasing to 350mV at 3A. Quiescent current at 500mA is only 5mA. Monolithic regulators cannot approach these figures because their power transistors do not provide the high beta and excellent saturation characteristics at high currents. The CS8128 is compatible with a wide variety of external transistors, allowing flexibility for thermal, space, and cost management.
The CS8128 includes thermal shutdown and externally programmable current limit and over-voltage shutdown, making it suitable for use in automotive and switching regulator post regulator applications. An optional external RC filter added to the CS8128 supply lead provides EMC hardening in addition to the on-chip EMC hardening. The SENSE lead allows remote sensing of the output voltage for improved regulation.
An active microprocessorRESET function is included on-chip with externally programmable delay time. During power-up, or after detection of any error in the regulated output, the RESET lead will remain in the low state for the duration of the delay. Types of errors include short circuit, low input voltage, overvoltage shutdown, thermal shutdown, or others that cause the output to become unregulated. This function is independent of the input voltage and will function correctly with an output voltage as low as 1V. Hysteresis is included in both the reset and delay comparators for noise immunity and to prevent oscillations. A latching discharge circuit is used to discharge the delay capacitor, even when triggered by a relatively short fault condition. This circuit improves upon the commonly used SCR structure by providing improved noise immunity and full capacitor discharge (0.2V typ).
CS8128 Maximum Ratings
Power Dissipation.................................................................................................Internally Limited Input Voltage ................................................................................................................0.3V, 26V Transient Input Voltage .............................................................................................................60V Output Current .....................................................................................................Externally Limited ESD Susceptibility (Human Body Model)......................................................................................2kV Junction Temperature ..........................................................................................45°C to 150°C Storage Temperature...........................................................................................55°C to 150°C Lead Temperature Soldering Wave Solder (through hole styles only)......10 sec. max, 260°C peak Reflow (SMD styles only) ...................................................60 sec. max above 183°C, 230°C peak
CS8128 Features
Externally Set Delay for Reset 60V Load Dump Protection Internal Thermal Overload Protection 3% Output Accuracy Active RESET Noise Immunity On Chip EMC Hardening Protection Incorporated Externally Set Current Limit Externally Set Overvoltage Shutdown
CS8128 Connection Diagram
CS8129 General Description
The CS8129 is a precision 5V linear reg- ulator capable of sourcing 750mA. The RESET threshold voltage has been lowered to 4.2V so that the regulator can be used with 4V microprocessors.
The lower RESET threshold also per- mits operation under low battery condi- tions (5.5V plus a diode). The RESET's delay time is externally programmed using a discrete RC network. During power up, or when the output goes out of regulation, RESET remains in the low state for the duration of the delay.
This function is independent of the input voltage and will function correct- ly as long as the output voltage remains at or above 1V. Hysteresis is included in the Delay and the RESET comparators to improve noise immunity. A latching discharge circuit is used to discharge the delay capacitor when it is triggered by a brief fault condition.
The regulator is protected against a variety of fault conditions: i.e. reverse battery, overvoltage, short circuit and thermal runaway conditions. The regu- lator is protected against voltage tran- sients ranging from -50V to +40V. Short circuit current is limited to 1.2A (typ). The CS8129 is packaged in a 5 lead TO-220 and a 16 lead surface mount package.
CS8129 Maximum Ratings
Input Operating Range.....................................................................................................-0.5 to 26V Power Dissipation...................................................................................................Internally Limited Peak Transient Voltage (46V Load Dump @ 14V VIN) ........................................................-50V, 60V Output Current .......................................................................................................Internally Limited ESD Susceptibility (Human Body Model)........................................................................................4kV Junction Temperature...................................................................................................-55 to 150 Storage Temperature...................................................................................................-55 to 150 Lead Temperature Soldering Wave Solder (through hole styles only) ............................................10 sec. max, 260 peak Reflow (SMD styles only) ...............................................60 sec. max above 183, 230 peak
CS8129 Features
·5V +/- 3% Regulated Output ·Low Dropout Voltage (0.6V @ 0.5A) ·750mA Output Current Capability ·Reduced Threshold for use with 4V Micro- processors ·Externally RESET Programmed RESET Delay ·Fault Protection Reverse Battery 60V, -50V Peak Transient Voltage Short Circuit Thermal Shutdown