Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
Descr The CS8441 is a Stepper Motor Driver that implements an H-Bridge design in order to drive two coils in an eight step sequence per revolu-tion in the divide by 1 mode; 16 step sequence in the divide by 2 mode. The H-Bridge is capable of deliver- ing 85mA to the load.
The sequencer insures that the odometer is monotonic. This sequencer is configured such that simultaneous conduction does not occur. Before each successive out- put sequence the part is taken through a state where both outputs are turned off individually. This tends to minimize the inductivekick back energy that the part must absorb. On chip clamp diodes are across each output to protect the part from the kick back energy that it must absorb.
Additional part protection is pro- vided by two functions. The first being "short circuit protection". This function will protect the part in the case of a shorted or partially shorted load. The second protection function is the "overvoltage func- tion". This function monitors the level of the supply voltage. In tran-sient conditions such as load dump,the part will shut down, protecting itself.
CS8441 Maximum Ratings
Supply Voltage (VCC) (continuous) -40˚C to +105˚C......................0.5 to 24V (100ms pulse transient) -40˚C to +105˚C..........................0.5 to 60V Input Voltage (VIN) .............................................................0.3 to VCC +0.3V Storage Temperature Range (TSTG).........................................-65°C to 150°C Junction Temperature Range...................................................40°C to 150°C ESD (Human Body Model) ..........................................................................2kV Lead Temperature Soldering Wave Solder(through hole styles only).............10 sec. max, 260°C peak
CS8441 Features
No Cross-conduction in either H-bridge Divide by 1 and Divide by 2 Mode Guaranteed Monotonic On Chip Flyback Diodes Fault Protection Overvoltage Load Dump Protection to 60V