Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The DS92LV040A is one in a series of Bus LVDS transceivers designed specifically for high speed, low power backplane or cable interfaces. The device operates from a single 3.3V power supply and includes four differential line drivers and four receivers. To minimize bus loading, the driver outputs and receiver inputs are internally connected. The device also features a flow through pin out which allows easy PCB routing for short stubs between its pins and the connector.
The driver translates 3V LVTTL levels (single-ended) to differential Bus LVDS (BLVDS) output levels. This allows for high speed operation while consuming minimal power and reducing EMI. In addition, the differential signaling provides common mode noise rejection greater than ±1V. The receiver threshold is less than +0/−70 mV. The receiver translates the differential Bus LVDS to standard (LVTTL/LVCMOS) levels. (See Applications Information Section for more details.)
DS92LV040A Maximum Ratings
Supply Voltage (VCC) 4.0V Enable Input Voltage (DE, RE) −0.3V to (VCC +0.3V) Driver Input Voltage (DIN) −0.3V to (VCC +0.3V) Receiver Output Voltage (ROUT) −0.3V to (VCC +0.3V) Bus Pin Voltage (DO/RI±) −0.3V to +3.9V ESD (Note 4) (HBM 1.5 kΩ, 100 pF) >4kV Machine Model >250V Maximum Package Power Dissipation at 25°C LLP(Note 3) 4.8 W Derate LLP Package 38.8mW/°C ja (Note 3) 25.8°C/W jc 25.5°C/W Storage Temperature Range −65°C to +150°C Lead Temperature (Soldering, 4 sec.) 260°C
DS92LV040A Features
·Bus LVDS Signaling ·Propagation delay: Driver 2.3ns max, Receiver 3.2ns max ·Low power CMOS design ·100% Transition time 1ns driver typical, 1.3ns receiver typical ·High Signaling Rate Capability (above 155 Mbps) ·0.1V to 2.3V Common Mode Range for VID = 200mV ·70 mV Receiver Sensitivity ·Supports open and terminated failsafe on port pins ·3.3V operation ·Glitch free power up/down (Driver & Receiver disabled) ·Light Bus Loading (5 pF typical) per Bus LVDS load ·Designed for Double Termination Applications ·Balanced Output Impedance ·Product offered in 44 pin LLP (Leadless Leadframe ·Package) package ·High impedance Bus pins on power off (VCC = 0V)