Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The EPCS1SI8 is a kind of serial configuration device with a 1,048,576 bit memory size. It is a flash memory device with a serial interface that can store configuration data for a Stratix II FPGA or a Cyclone series device and reload the data to the device upon power-up or reconfiguration.
There are some features as follows: (1) easy-to-use four-pin interface; (2) low cost, low pin count and non-volatile memory; (3) low current during configuration and near-zero standby mode current; (4) 3.3-V operation; re-programmable memory with more than 100,000 erase/program cycles; (5) write protection support for memory sectors using status register bits; in-system programming support with SRunner software driver; (6) additional programming support with the Altera® Programming Unit (APU) and programming hardware from BP Microsystems, System General, and other vendors; (7) available in 8-pin and 16-pin small outline integrated circuit (SOIC) package.
What comes next is about the absolute maximum ratings. (1): VCC (supply voltage with respect to ground) is from -0.6 to 4.0 V; (2): VI (DC input voltage with respect to ground) is from -0.6 to 4.0 V; (3): IMAX (DC VCC or GND current) is 15 mA; (4): IOUT (DC output current per pin) is from -25 to 25 mA; (5): PD (power dissipation) is 54 mW; (6): storage temperature (no bias) is from -65 to +150; (7): storage temperature (under bias) is from -65 to +135; (8): ambient temperature (under bias) is from -65 to +135; (9): junction temperature (under bias) is 135.