Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
0.53" L x 0.40" W x 0.17" H (13.5mm x 10.2mm x 4.3mm)
Common Pin
-
Digit/Alpha Size
0.29" (7.4mm)
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
HDSP 0761 HDSP0761
HDSP-0761 General Description
These solid state display devices are designed and tested for use in adverse industrial environments. The character height is 7.4 mm (0.29 inch). The numeric and hexadecimal devices incorporate an on-board IC that contains the data memory, decoder and display driver functions.
The numeric devices decode positive BCD logic into characters"0-9", a "" sign, decimal point, and a test pattern. The hexadecimal devices decode positive BCD logic into 16 characters, "0-9, A-F."An input is provided on the hexadecimal devices to blank the display (all LEDs off) without losing the contents of the memory.
The over range device displays "±1" and right hand decimal point and is typically driven via external switching transistors.
HDSP-0761 Maximum Ratings
Description
Symbol
Min.
Max.
Unit
Storage Temperature, Ambient
TS
-65
+100
Operating Temperature, Ambient[1]
TA
-55
+85
Supply Voltage[2]
VCC
-0.5
+7.0
V
Voltage Applied to Input Logic, dp and Enable Pins
VI, VDP, VE
-0.5
VCC
V
Voltage Applied to Blanking Input[2]
VB
-0.5
VCC
V
Maximum Solder Temperature at 1.59 mm (0.062 inch) Below Seating Plane, t 5 seconds
260
Notes: 1. The nominal thermal resistance of a display mounted in a socket that is soldered onto a printed circuit board is RJA = 50/W/device. The device package thermal resistance is RJ-PIN = 15 /W/device. The thermal resistance device pin-to-ambient through the PC board should not exceed 35/W/device for operation at TA = +85. 2. Voltage values are with respect to device ground, pin 6. 3. These displays are categorized for luminous intensity with the intensity category designated by a letter code located on the back of the display package. Case temperature of the device immediately prior to the light measurement is equal to 25.
HDSP-0761 Features
• Three Colors High-Efficiency Red Yellow High Performance Green •Two High-Efficiency Red Options Low Power High Brightness • Three Character Options Numeric Hexadecimal Over Range •Performance Guaranteed over Temperature •Memory Latch/Decoder/ Driver TTL Compatible • 4 x 7 Dot Matrix Character • Categorized for Luminous Intensity • Yellow and Green Categorized for Color
0.53" L x 0.40" W x 0.17" H (13.5mm x 10.2mm x 4.3mm)
Common Pin
-
Digit/Alpha Size
0.29" (7.4mm)
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
HDSP 0770 HDSP0770
HDSP-0770 General Description
These solid state display devices are designed and tested for use in adverse industrial environments. The character height is 7.4 mm (0.29 inch). The numeric and hexadecimal devices incorporate an on-board IC that contains the data memory, decoder and display driver functions.
The numeric devices decode positive BCD logic into characters"0-9", a "" sign, decimal point, and a test pattern. The hexadecimal devices decode positive BCD logic into 16 characters, "0-9, A-F."An input is provided on the hexadecimal devices to blank the display (all LEDs off) without losing the contents of the memory.
The over range device displays "±1" and right hand decimal point and is typically driven via external switching transistors.
HDSP-0770 Maximum Ratings
Description
Symbol
Min.
Max.
Unit
Storage Temperature, Ambient
TS
-65
+100
Operating Temperature, Ambient[1]
TA
-55
+85
Supply Voltage[2]
VCC
-0.5
+7.0
V
Voltage Applied to Input Logic, dp and Enable Pins
VI, VDP, VE
-0.5
VCC
V
Voltage Applied to Blanking Input[2]
VB
-0.5
VCC
V
Maximum Solder Temperature at 1.59 mm (0.062 inch) Below Seating Plane, t 5 seconds
260
Notes: 1. The nominal thermal resistance of a display mounted in a socket that is soldered onto a printed circuit board is RJA = 50/W/device. The device package thermal resistance is RJ-PIN = 15 /W/device. The thermal resistance device pin-to-ambient through the PC board should not exceed 35/W/device for operation at TA = +85. 2. Voltage values are with respect to device ground, pin 6. 3. These displays are categorized for luminous intensity with the intensity category designated by a letter code located on the back of the display package. Case temperature of the device immediately prior to the light measurement is equal to 25.
HDSP-0770 Features
• Three Colors High-Efficiency Red Yellow High Performance Green •Two High-Efficiency Red Options Low Power High Brightness • Three Character Options Numeric Hexadecimal Over Range •Performance Guaranteed over Temperature •Memory Latch/Decoder/ Driver TTL Compatible • 4 x 7 Dot Matrix Character • Categorized for Luminous Intensity • Yellow and Green Categorized for Color