Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The L4953G contains a triple voltage regulator and a power switch.
The IC includes a monitoring circuit to warn if a low voltage or no voltage condition is occuring.
In stand-by output is active as long as possible even when in thermal shutdown or any other fault conditions.
The STCAP pin allows the use of a reserve supply capacitor that will hold enough energy for the 5V Stand-byline to allow the mP to store data.
L4953G Maximum Ratings
Symbol
Parameter
Value
Unit
VSDC
DC Operating Supply Voltage
6 to 28
V
VSTR
Transient Supply Voltage
50
V
IO
Output Current
internally limited
TOP
Operating Temperature Range
40 to 85
°C
TSTG
Storage Temperature
55 to 150
°C
L4953G Connection Diagram
L4953K General Description
The L4953K contains a triple voltage regulator and a power switch.
The IC includes a monitoring circuit to warn if a low voltage or no voltage condition is occuring. In stand-by output is active as long as possible even when in thermal shutdown or any other fault conditions.
The STCAP pin allows the use of a reserve supply capacitor that will hold enough energy for the 5V Stand-by line to allow the mP to store data.
L4953K Maximum Ratings
Symbol
Parameter
Value
Unit
VSDC
DC Operating Supply Voltage
14 to 28
V
VSTR
Transient Supply Voltage
50
V
IO
Output Current
internally limited
Top
Operating Temperature Range
40 to 85
°C
Tstg
Storage Temperature
55 to 150
°C
L4953K Connection Diagram
L4955 General Description
The L4955 is a family of monolithic ultra very low drop linear regulators designed to supply the most recent microprocessors.
The dropout voltage is only 0.75V (Typ.) at 5A, directly dependent on the output current conditions.
Realized in BCDII technology, it has on board a charge pump to properly drive an N-channel power mos Transistor with 150m of RDSON.
It operates from a 4.5V minimum supply, with a very low quiescent current irrespective of the load; a minimum of 22F output capacitor is required for stability.
The on-chip trimming techniques improve the precision of the available output voltages to ±2%.
Ancillary functions like power good, inhibit with low power consumption, programmable output voltage and current limiting make the flexible heptawatt version usable in applications where power management, stand-by, features, post regulation and adjustable current generators for battery chargers are important.
L4955 Maximum Ratings
Symbol
Parameter
Value
Unit
VIN
Supply Input Voltage
24
V
ADJ and CL pins PG and INH pins
-0.3 to 4 0 to VIN
VV
PTOT
Power Dissipation @ Tamb = 50°C Power Dissipation @ Tcase = 90°C
2 15
W W
Tst, Ti
Storage Temperature
-40 to +150
°C
L4955 Typical Application
PENTIUM]TM ANDPOWER PC]TM SUPPLIES POSTREGULATOR FOR SMPS LOW COST SOLUTION FOR 5V TO 3.3V CONVERSION LOW COST BATTERY CHARGER CONSTANT CURRENT REGULATOR SUITABLE FOR APPLICATION WITH STANDBY FEATURE