Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The LT1301 is a micropower step-up DC/DC converter that utilizes Burst Mode™ operation. The device can deliver 5V or 12V from a two-cell battery input. It features programmable 5V or 12V output via a logic-controlled input, noload quiescent current of 120A and a shutdown pin which reduces supply current to 10A. The on-chip power switch has a low 170mV saturation voltage at a switch current of 1A, a four-fold reduction over prior designs. A 155kHz internal oscillator allows the use of extremely small surface mount inductors and capacitors. Operation is guaranteed at 1.8V input. This allows more energy to be extracted from the battery, increasing operating life. The ILIM pin can be used for soft start or to program peak switch current with a single resistor allowing the use of even smaller inductors in lighter load applications. The LT1301 is available in an 8-lead SOIC package, minimizing board space requirements. For a selectable 3.3V/5V step-up converter, please see the LT1300. For higher output power, see the LT1302.
LT1301 Maximum Ratings
VIN Voltage .............................................................. 10V SW1 Voltage ............................................................ 20V Sense Voltage .......................................................... 20V Shutdown Voltage ................................................... 10V Select Voltage .......................................................... 10V ILIM Voltage ............................................................ 0.5V Maximum Power Dissipation ................................500mW Operating Temperature Range LT1301C .................................................0°C to 70°C LT1301I ................................................40°C to 85°C Storage Temperature Range ..............65°C to 150°C Lead Temperature (Soldering, 10 sec)..................300°C
LT1301 Features
12V at 120mA from 5V or 3.3V Supply Supply Voltage as Low as 1.8V Better High Current Efficiency Than CMOS Up to 89% Efficiency 120A Quiescent Current Shutdown to 10A Programmable 5V or 12V Output Low VCESAT Switch: 170mV at 1A Typical ILIM Pin Programs Peak Switch Current Uses Inexpensive Surface Mount Inductors 8-Lead DIP or SOIC Package
LT1301 Typical Application
Flash Memory VPP Generator Palmtop Computers Portable Instruments Bar-Code Scanners Personal Digital Assistants PCMCIA Cards