Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The LTC1063 is the first monolithic filter providing both clock-tunability, low DC output offset and over 12-bit DC accuracy. The frequency response of the LTC1063 closely approximates a 5th order Butterworth polynomial. With appropriate PCB layout techniques the output DC offset typically 1mV and is constant over a wide range of clock frequencies. With ±5V supplies and ±4V input voltage range, the CMR of the device is 80dB.
The filter cutoff frequency is controlled either by an internal or external clock. The clock-to-cutoff frequency ratio 100:1. The on-board clock is power supply independent, and it is programmed via an external RC. The 50mVRMS clock feedthrough is considerably reduced over existing monolithic filters.
The LTC1063 wideband noise is 95mVRMS, and it can process large AC input signals with low distortion. With ±7.5V supplies, for instance, the filter handles up 4VRMS (92dB S/N ratio) while the standard 1kHz THD below 0.02%; 80dB dynamic ranges (S/N +THD) is obtained with input levels between 1VRMS and 2.3VRMS.
The LTC1063 is available in 8-pin miniDIP and 16-pin SOL. For a linear phase response, see LTC1065 data sheet.
LTC1063 Maximum Ratings
Total Supply Voltage (V + to V ) .......................... 16.5V Power Dissipation............................................. 400mW Voltage at Any Input .... (V 0.3V) £ VIN £ (V+ + 0.3V) Burn-In Voltage ...................................................... 16V Operating Temperature Range ............... 40°C to 85°C Storage Temperature Range ................ 65°C to 150°C Lead Temperature (Soldering, 10 sec)................. 300°C
LTC1063 Features
Clock-Tunable Cutoff Frequency 1mV DC Offset (Typical) 80dB CMRR (Typical) Internal or External Clock 50mVRMS Clock Feedthrough 100:1 Clock-to-Cutoff Frequency Ratio 95mVRMS Total Wideband Noise 0.01% THD at 2VRMS Output Level 50kHz Maximum Cutoff Frequency Cascadable for Faster Roll-Off Operates from ±2.375 to ±8V Power Supplies Self-Clocking with 1 RC