Part Number: MCP6544T-I/ST TSSOP-14 2500 MICROCHIP 2004 -
MFG: 6
Package Cooled: MSOP
D/C: 06+
Attentive hint
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The Microchip Technology Inc. MCP6546/7/8/9 family of comparators is offered in single (MCP6546), single with chip select (MCP6548), dual (MCP6547) and quad (MCP6549) configurations. The outputs are open-drain and are capable of driving heavy DC or capacitive loads.
These comparators are optimized for low power, single-supply application with greater than rail-to-rail input operation. The output limits supply current surges and dynamic power consumption while switching. The open-drain output of the MCP6546/7/8/9 family can be used as a level-shifter for up to 10V using a pull-up resistor. It can also be used as a wired-OR logic. The internal Input hysteresis eliminates output switching due to internal noise voltage, reducing current draw. These comparators operate with a single-supply voltage as low as 1.6V and draw less than 1 A/ comparator of quiescent current.
The related MCP6541/2/3/4 family of comparators from Microchip has a push-pull output that supports rail-torail output swing and interfaces with CMOS/TTL logic.
MCP6546 Maximum Ratings
1.1 Absolute Maximum Ratings † VDD - VSS ..............................................................7.0V Open-Drain output..................................... VSS +10.5V All inputs and outputs ........... VSS0.3V to VDD +0.3V Difference Input voltage ........................... |VDD - VSS| Output Short-Circuit Current .....................continuous Current at Input Pins .......................................±2 mA Current at Output and Supply Pins ................±30 mA Storage temperature ....................-65°C to +150°C Maximum Junction Temperature (TJ) ............ +150°C ESD protection on all pins (HBM;MM)...........4 kV;200V
† Notice: Stresses above those listed under "Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational listings of this specification is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability.
MCP6546 Features
• Low Quiescent Current: 600 nA/comparator (typ.) • Rail-to-Rail Input: VSS - 0.3V to VDD + 0.3V • Open-Drain Output: VOUT 10V • Propagation Delay 4 s (typ.) • Wide Supply Voltage Range: 1.6V to 5.5V • Single available in SOT-23-5, SC-70-5 packages • Available in Single, Dual and Quad • Chip Select (CS) with MCP6548 • Low Switching Current • Internal Hysteresis: 3.3 mV (typ.) • Industrial Temperature: -40°C to +85°C
MCP6546 Typical Application
• Laptop Computers • Mobile Phones • Metering Systems • Hand-held Electronics • RC Timers • Alarm and Monitoring Circuits • Windowed Comparators • Multi-vibrators