Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The ML4801 is a controller for power factor corrected, switched mode power supplies. Key features of this combined PFC and PWM controller are low start-up and operating currents. Power Factor Correction (PFC) allows the use of smaller, lower cost bulk capacitors, reduces power line loading and stress on the switching FETs, and results in a power supply that fully complies with IEC1000-2-3 specifications. The ML4801 includes circuits for the implementation of a leading edge, average current "boost" type power factor correction and a trailing edge pulse width modulator (PWM).
The PFC frequency of the ML4801 is automatically set at half that of the PWM frequency generated by the internal oscillator. This technique allows the user to design with smaller output components while maintaining the optimum operating frequency for the PFC. An overvoltage comparator shuts down the PFC section in the event of a sudden decrease in load. The PFC section also includes peak current limiting and input voltage brownout protection.
ML4801 Maximum Ratings
Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied.
VCC ............................................................................................... 18V ISENSE Voltage .................................................. -3V to 5V Voltage on Any Other Pin ...... GND - 0.3V to VCC + 0.3V IREF ............................................................................................20mA IAC Input Current .................................................... 10mA Peak PFC OUT Current, Source or Sink ................ 500mA Peak PWM OUT Current, Source or Sink .............. 500mA PFC OUT, PWM OUT Energy Per Cycle .................. 1.5J Junction Temperature .............................................. 150°C Storage Temperature Range ..................... 65°C to 150°C Lead Temperature (Soldering, 10 sec) ..................... 260°C Thermal Resistance (qJA) Plastic DIP ....................................................... 80°C/W Plastic SOIC .................................................. 105°C/W
ML4801 Features
`Internally synchronized PFC and PWM in one IC `Low start-up current (200A typ.) `Low operating current (5.5mA typ.) `Low total harmonic distortion `Reduces ripple current in the storage capacitor between the PFC and PWM sections `Average current continuous boost leading edge PFC `High efficiency trailing edge PWM optimized for current mode operation `Current fed gain modulator for improved noise immunity `Brown-out control, overvoltage protection, UVLO, and soft start