Part Number: P2781AF-08SR SOP-8P 2500 ETAPOWEREU 2004 -
MFG: TSSOP8
Package Cooled: 800
D/C: 06+
Attentive hint
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The P278xA is a versatile spread spectrum frequency modulator designed specifically for digital camera and other digital video and imaging applications. The P278xA reduces electromagnetic interference (EMI) at the clock source, which provides system wide reduction of EMI of all clock dependent signals. The P278xA allows significant system cost savings by reducing the number of circuit board layers and shielding that are traditionally required to pass EMI regulations.
The P278xA uses the most efficient and optimized modulation profile approved by the FCC. The P278xA modulates the output of a single PLL in order to "spread" the bandwidth of a synthesized clock and, more importantly, decreases the peak amplitudes of its harmonics. This results in significantly lower system EMI compared to the typical narrow band signal produced by oscillators and most frequency generators. Lowering EMI by increasing a signal's bandwidth is called spread spectrum clock generation.
P2782 Maximum Ratings
Symbol
Parameter
Rating
Unit
VDD
Supply voltage, DC
(VSS 0.5) to 7
V
VI
Input voltage, DC
(VSS-0.5) to (VDD+0.5)
V
VO
Output voltage, DC
(VSS-0.5) to (VDD+0.5)
V
IIK
Input clamp current (VI<0 or VI>VDD)
-50 to +50
mA
IOK
Output clamp current (VI<0 or VI>VDD)
-50 to +50
mA
TS
Storage temperature
-65 to +125
°C
TA
Ambient temperature range, under bias
-55 to +125
°C
TJ
Junction temperature
150
°C
Lead temperature (soldering 10 sec)
260
°C
Input static discharge voltage protection (As per JEDEC STD22- A114-B)
2
KV
Note: These are stress ratings only and functional operation is not implied. Exposure to absolute maximum ratings for extended periods may affect device reliability.
P2782 Features
·Provides up to 15dB of EMI suppression ·FCC approved method of EMI attenuation ·Generates a 1X, 2X, and 4X low EMI spread spectrum clock of the input frequency ·Input frequency range from 3 to 78MHz ·External loop filter for spread % adjustment ·Spreading ranges from ±0.25% to ±5.0% ·Ultra low cycle-to-cycle jitter ·Zero-cycle slip ·3.3V operating voltage range ·10 mA output drives ·TTL or CMOS compatible outputs ·Ultra-low power CMOS design ·P278XA is available in 8 pin SOIC and TSSOP Packages ·Available for industrial and automotive temperature ranges.
P2782 Typical Application
The P278xA is targeted towards MFP, xDSL, fax modem,set-top box, USB controller, DSC, and embedded systems.