Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The ST485E is al low power transceiver for RS-485 and RS-422 communication. Each driver output and receiver input is protected against ±15KV electrostatic discharge (H.B.M.) (ESD) shocks, without latcup. These parts contain onedriver and one receiver in half duplex configuration. This transceiver draw 300A (typ.) of supply current when unloaded or fully loaded with disabled drivers. It operates from a single 5V supply. Driver is short-circuit current limited and is protected against excessive power dissipation by thermal shutdown circuitry that place the driver outputs into a high-impedance state. The ST485E is designed for bi-directional data communications on multipoint bus transmission line (half-duplex applications).
ST485E Maximum Ratings
Symbol
Parameter
Value
Unit
VCC
Supply Voltage
7
V
VI
Control Input Voltage (RE, DE)
-0.5 to (V CC+ 0.5)
V
VDI
Driver Input Voltage (DI)
-0.5 to (VCC + 0.5)
V
VDO
Driver Output Voltage (A, B)
± 14
V
VRI
Receiver Input Voltage (A, B)
± 14
V
VRO
Receiver Output Voltage (RO)
0.5 to (VCC + 0.5)
V
AbsoluteMaximum Ratings are those values beyond which damage to the device may occur. Functional operation under thesecondition is not implied.
ST485E Features
LOW QUIESCENT CURRENT: 300A DESIGNED FOR RS-485 INTERFACE APPLICATIONS -7V TO 12V COMMON MODE INPUT VOLTAGE RANGE DRIVER MAINTAINS HIGH IMPEDANCE IN 3-STATEORWITHTHEPOWEROFF 70mV TYPICAL INPUT HYSTERESIS 30ns PROPAGATION DELAYS, 5ns SKEW OPERATE FROM A SINGLE 5V SUPPLY CURRENT LIMITING AND THERMAL SHUTDOWN FOR DRIVER OVERLOAD PROTECTION ESD PROTECTION: ±15KV (H.B.M.) ±8KV (IEC-1000-4-2 CONTACT DISCHARGE) ALLOWS UP TO 64 TRANSCEIVERS ON THE BUS