Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The ST62T08C,T09C,T10C,T20C and ST62E20C devices are low cost members of the ST62xx 8-bit HCMOS family of microcontrollers, which is targeted at low to medium complexity applications. All ST62xx devices are based on a building block approach: a common core is surrounded by a number of on-chip peripherals.
The ST62E20C is the erasable EPROM version of the ST62T08C,T09C,T10C and T20C device, which may be used to emulate the ST62T08C,T09C,T10C and T20C device, as well as the respective ST6208C,09C,10C,20C ROM devices.
OTP and EPROM devices are functionally identical. The ROM based versions offer the same functionality selecting as ROM options the options defined in the programmable option bytes of the OTP/EPROM versions.
OTP devices offer all the advantages of user programmability at low cost, which make them the ideal choice in a wide range of applications where frequent code changes, multiple code versions or last minute programmability are required.
These compact low-cost devices feature a Timer comprising an 8-bit counter and a 7-bit programmable prescaler,an 8-bit A/D Converter with up to 8 analog inputs and a Digital Watchdog timer, making them well suited for a wide range of automotive, appliance and industrial applications.
ST62T10C Maximum Ratings
Symbol
Parameter
Value
Unit
VDD
Supply Voltage
-0.3 to 7.0
V
VI
Input Voltage
VSS - 0.3 to VDD + 0.3(1)
V
VO
Output Voltage
VSS - 0.3 to VDD + 0.3(1)
V
IVDD
Total Current into VDD (source)
80
mA
IVSS
Total Current out of VSS (sink)
100
mA
TJ
Junction Temperature
150
TSTG
Storage Temperature
-60 to 150
Notes: - Stresses above those listed as "absolute maximum ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these conditions is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. - (1) Within these limits, clamping diodes are guarantee to be not conductive. Voltages outside these limits are authorised as long as injection current is kept within the specification.
This product contains devices to protect the inputs against damage due to high static voltages, however it is advisable to take normal precaution to avoid application of any voltage higher than the specified maximum rated voltages.
For proper operation it is recommended that VI and VO be higher than VSS and lower than VDD.Reliability is enhanced if unused inputs are connected to an appropriate logic voltage level (VDD or VSS).Power Considerations.The average chip-junction temperature, Tj, in Celsius can be obtained from: Tj=TA + PD x RthJA Where:TA = Ambient Temperature. RthJA =Package thermal resistance (junction- to ambient). PD = Pint + Pport. Pint =IDD x VDD (chip internal power). Pport =Port power dissipation (determined by the user).
ST62T10C Features
` 3.0 to 6.0V Supply Operating Range ` 8 MHz Maximum Clock Frequency ` -40 to +125°C Operating Temperature Range ` Run, Wait and Stop Modes ` 5 Interrupt Vectors ` Look-up Table capability in Program Memory ` Data Storage in Program Memory: User selectable size ` Data RAM: 64bytes ` User Programmable Options ` 12 I/O pins, fully programmable as: Input with pull-up resistor Input without pull-up resistor Input with interrupt generation Open-drain or push-pull output Analog Input (except ST62T08C) ` 4 I/O lines can sink up to 20mA to drive LEDs or TRIACs directly ` 8-bit Timer/Counter with 7-bit programmable prescaler ` Digital Watchdog ` Oscillator Safe Guard ` Low Voltage Detector for Safe Reset ` 8-bit A/D Converter with up to 8 analog inputs ` On-chip Clock oscillator can be driven by Quartz Crystal Ceramic resonator or RC network ` Power-on Reset ` One external Non-Maskable Interrupt ` ST626x-EMU2 Emulation and Development System (connects to an MS-DOS PC via a parallel port)