Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The TPA321 is a bridge-tied load (BTL) audio power amplifier developed especially for low-voltage applications here internal speakers are required. Operating with a 3.3-V supply, the TPA321 can deliver 250 mW of ontinuous power into a BTL 8- load at less than 1% THD+N throughout voice band frequencies. Although this evice is characterized out to 20 kHz, its operation was optimized for narrower band applications such as cellular ommunications. The BTL configuration eliminates the need for external coupling capacitors on the output in ost applications, which is particularly important for small battery-powered equipment. This device features a hutdown mode for power-sensitive applications with a quiescent current of 0.15 A during shutdown. The PA321 is available in an 8-pin SOIC surface-mount package and the surface-mount PowerPAD™ MSOP, which educes board space by 50% and height by 40%.
TPA321 Maximum Ratings
UNIT
VSS Supply voltage, AVDD, PVDD
6 V
VI Input voltage,
−0.3 V to VDD + 0.3 V
Continuous total power dissipation
See Dissipation Rating Table
TA Operating free-air temperature range
- 40°C to 85°C
TJ Operating junction temperature range
40°C to 150°C
Tstg Storage temperature range
65°C to 150°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260°C
260°C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
TPA321 Features
` Fully Specified for 3.3-V and 5-V Operation ` Wide Power Supply Compatibility .5 V 5.5 V ` Output Power for RL = 8 350 mW at VDD = 5 V 250 mW at VDD = 3.3 V ` Ultralow Supply Current in Shutdown ode . . . 0.15 A ` Thermal and Short-Circuit Protection ` Surface-Mount Packaging SOIC PowerPAD™ MSOP
TPA321 Connection Diagram
TPA321D Parameters
Technical/Catalog Information
TPA321D
Vendor
Texas Instruments
Category
Integrated Circuits (ICs)
Package / Case
8-SOIC (3.9mm Width)
Type
Class AB
Output Type
1-Channel (Mono)
Voltage - Supply
2.5 V ~ 5.5 V
Packaging
Tube
Features
Differential Inputs, Short-Circuit and Thermal Protection, Shutdown