About SeekIC | Services | Payment | Advertisements service | Contact Us | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
2SD1301,HX6656KEHT,74LVC244ATTR,
2SD1301
The 2SD1301 is a si npn triple diffused mesa;horizontal deflection output for small color TV set.Features of the 2SD1301 are :(1)built-in damper diode on chip; (2)high voltage,high speed switching; (3)wide area of safe o...HX6656KEHT
The HX6656KEHT is a 32K×8ROM-SOI.The 32K x 8 Radiation Hardened ROM is a high perform-ance 32,768 word x 8-bit read only memory with industry-standard functionality. It is fabricated with Honeywell’sradiation hardened t...IDT72413L45P
The IDT72413L45P is one of the IDT72413 series.The IDT72413L45P is a 64 x 5, high-speed First-In/First-Out(FIFO) that loads and empties data on a first-in-first-out basis.It is expandable in bit width. All speed versions...KSM-911SY1N
The KSM-911SY1N consist of a PIN Photodiode of high speed and a preamplifier IC in the package as an receiver for Infrared remote control systems. Features of the KSM-911SY1N are:(1)Wide angle design; (2)Supply-volta...IDT82V1068
The IDT82V1068 is a feature rich, single-chip, programmable 8 channel PCM CODEC with on-chip filters. Besides the A-Law/µ-Law companding and linear coding/decoding (16-bit 2ís complement), the IDT82V1068 provides 2...BA7655AF-E2
The BA7655AF-E2 is one of the BA7655AF series.The BA7655AF-E2 is 2ch voltage controlled amplifier for adjustment video signal level,silicon monolithic integrated circuit. Features of the BA7655AF-E2 are:(1)broadband fre...WH2002D
The WH2002D is designed as one kind of 20 x 2 character that has some points of features:(1)5 x 8 dots includes cursor;(2)built-in controller (KS0066 or equivalent);(3)+5 V power supply;(4)1/16 duty cycle;(5)LED can be d...X9421WS-2.7
The X9421WS-2.7 is one member of the X9420 family which is designed as the single digitally controlled (XDCP) potentiometer that can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a w...X9448WP24
The X9448WP24 is one member of the X9448 family which is designed as the monolithic CMOS IC that incorporates two operational amplifiers and two nonvolatile digitally controlled potentiometers. This device can be used to...WM-C1602Q
The WM-C1602Q is designed as one kind of 16×2 character that has some points of features:(1)5 x 7 dots with cursor; (2)built in controller (HD44780 or equivalent); (3)+5V power supply (also available for +3V); (4)1/16 du...CAT1641WI-30TSSOP
The CAT1641WI-30TSSOP is designed as one kind of supervisory circuit that belongs to the CAT1641 family. This device provides a precision VCC sense circuit that drives an open drain output, and is also available in the 8...WH1604A
The WH1604A is designed as one kind of 16 x 4 character that has some points of features:(1)5 x 8 dots includes cursor;(2)built-in controller (KS0066 or equivalent);(3)+5 V power supply;(4)1/16 duty cycle;(5)LED can be d...74LVC244AMTR
The 74LVC244AMTR is a low voltage CMOS OCTAL BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low n...IDT74LVC244ASO
The IDT74LVC244ASO is orgnized as two 4-bit line drivers with separate output-enable(OE) inputs.When OE is low,the device passes data from the A inputs to the Y outputs.When OE is high,the outputs are in the high-impedan...TMS320VC5416-160
The TMS320VC5416-160 fixed-point,digital signal processor (DSP) (hereafter referred to as the device unless otherwise specified) is based on an advanced modified harvard architecture that has one program memory bus and t...SN74LVC821ADB
The SN74LVC821ADB features 3-state output designed specifically for driving highly capacitive or relatively low-impedance loads.Inputs can be driven from either 3.3V or 5.0V devices.This feature allows the use of these d...SN54LVC652ADB
The SN54LVC652ADB octal bus transceiver and register is designed for 2.7-V to 3.6-V Vcc operation.The SN54LVC652ADB consist of bus transceiver circuits,D-type flip-flops,and control circuitry arranged for multiplexed tra...MC74LVX373DT
The MC74LVX373DT is one member of the MC74LVX373 series.The MC74LVX373 is an advanced high speed CMOS octal latch with 3–state outputs. The inputs tolerate voltages up to 7V, allowing the interface of 5V systems to 3V sy...TC74LVX174F
The TC74LVX174F is one member of the TC74LVX174 series.The TC74LVX174 is a high speed CMOS HEX D-FLIP FLOP fabricated with silicon gate CZMOS technology.Designed for use in 3.3 Volt systems, they achieve high speed opera...TC74LVX240F
The TC74LVX240F is one member of the TC74LVX240 series.The TC74LVX240 is a high-speed CMOS octal bus buffer fabricated using silicon gate CMOS technology.Designed for use in 3-V systems, it achieves high-speed operation ...BU7831KN
The BU7831KN is designed as one kind of audio management for cellular phone that has two points of features:(1)voice or audio input / output selector (6 input and 5 output);(2)include multi mixing function. The absolute...BH7868FS
The BH7868FS is designed as one kind of 6 outputs video driver for DVD applications that has some points of features:(1)built-in LPF with characteristics suited to DVD players and recorders;(2)built-in 6-output video dri...CD74HCT00M96
The CD74HCT00M96 is designed as one kind of high-speed CMOS logic quad 2-input NAND gate that utilizes silicon gate CMOS technology to achieve operating speeds similar to LSTTL gates with the low power consumption of sta...CD4029BM
The CD4029BM is designed as one kind of presettable up/down counter which counts in either binary or decade mode depending on the voltage level applied at binary/decade input. This device is advanced one count at the pos...MAX3701CTJ
The MAX3701CTJ is one member of the MAX3701 family which is designed as the ±50V isolated, 3.0V to 5.5V, 250kbps, 2 Tx/2 Rx, RS-232 transceiver that can be used in (1)industrial control; (2)programmable logic controller;...NJM3357
The NJM3357 is designed as the low power narrow band FM IF that includes oscillator, mixer, limiting amplifier quadrature discriminator, active filter, squelch, scan control and mute switch. This device is designed for u...CY7C68013A-56LFXC
The CY7C68013A-56LFXC is designed as one kind of EZ-USB FX2LP USB microcontroller that can be used in (1)Portable video recorder; (2)MPEG/TV conversion; (3)DSL modems; (4)ATA interface; (5)Memory card readers; (6)Legacy ...MAX6950CEE
The MAX6950CEE is one member of the MAX6950 family which is designed as the serially interfaced, +2.7V to +5.5V, 5- and 8-digit LED display driver that can be used in (1)set-top boxes; (2)panel meters; (3)white goods; (4...MC14528BCL
The MC14528BCL is one member of the MC14528 family which is designed as the dual, retriggerable, resettable monostable multivibrator that may be triggered from either edge of an input pulse, and produces an output pulse ...HD44103CH
The HD44103CH is designed as a common signal driver for dot matrix liquid crystal graphic display systems. It generates the timing signals required for display with its internal oscillator and supplies them to the column...HD74LS368A
The HD74LS368A is designed as one kind of hex bus drivers (inverted data outputs with three-state outputs).Some absolute maximum ratings have been concluded into several points as follow. (1)Its supply voltage would be 7...CY54FCT374ATLMB
The CY54FCT374ATLMB is designed as one kind of high-speed, low-power, octal D-type flip-flops, featuring separate D-type inputs for each flip-flop. It has 3-state outputs for bus-oriented applications. A buffered clock (...CA3493
The CA3493 is designed as one kind of ultra-stable, precision-instrumentation, optional amplifiers that employ both PMOS and bipolar transistors on a single monolithic chip. It is internally phase-compensated and provide...HD74LS245
The HD74LS245 is designed as one kind of ictal bus transceivers with three-state outputs for synchronous two-way communication between data buses. The control function implementation minimizes external timing requirement...BD6758KN
The BD6758KN is designed as one kind of 5 channel stepping motor driver with structure of silicon monolithic integrated circuit.It has two features. (1)Built in 4 full-ON drivers. (2)Built in 1 linear constant-current dr...ICS8343YT
The ICS8343YT is designed as a low skew, 1 to 16 fanout buffer and a member of the HiPerClockS family of high performance clock solutions from ICS. It is at 3.3V, 2.5V and mixed 3.3V input and 2.5V supply modes over the ...BD6757KN
The BD6757KN is 7ch stepping motor driver,silicon monolithic integrated circuit. Features of the BD6757KN are:(1)built in 6 full-on drivers; (2)built in 1 linear constant-current driver. The absolute maximum ratings of...2SC982TM
The 2SC982TM is a silicon npn epitaxial planar type(pct process)(darlington).Feature of the 2SC982TM is:high dc current gain:hFE(1)=5000(Min.)(Ic=10mA);hFE(2)=10000(Min.)(Ic=100mA). The absolute maximum ratings of the 2...2SK1921
The 2SK1921 is a n-channel MOS silicon fet,very high-speed,switching applications. Features of the 2SK1921 are:(1)low on resistance; (2)very high-speed switching; (3)low-voltage drive. The absolute maximum ratings of t...IRKJ91
The IRKJ91 is a ADD-A-pak GEN V power modules.The Generation V of Add-A-pak module combine the excellent thermal performance obtained by the usage of Direct Bonded Copper substrate with superior mechanical ruggedness, th...AD7672
The AD7672 is a high-speed 12-bit ADC,fabricated in an advanced,mixed technology ,linear-compatible CMOS(LC2MOS) process,which combines precision bipolar components with low-power, high-speed COMS logic. Features of the...IDT72V04L25J
The IDT72V04L25J is one of the IDT72V04 series.The IDT72V04 are dual-port FIFO memories that operate at a power supply voltage (Vcc) between 3.0V and 3.6V. Their architecture, functional operation and pin assignments ar...ISL83485
The ISL83485 is 3.3V, Low Power, High Speed or Slew Rate Limited, RS-485/RS-422 Transceivers.These Intersil RS-485/RS-422 devices are BiCMOS 3.3V powered, single transceivers that meet both the RS-485 and RS-422 standard...JANS2N7236U
The JANS2N7236U is a POWER MOSFET SURFACE MOUNT(SMD-1).HEXFET® MOSFET technology is the key to International Rectifier’s advanced line of power MOSFET transistors. The efficient geometry design achieves very low on-...KIC7W14FK
The KIC7W14FK is designed as one kind of high speed CMOS dual bilateral switch fabricated with silicon gate CMOS technology. This device consists of four independent high speed switches capable of controlling either digi...KIA6419
The KIA6419 is designed as one kind of low power audio amplifier integrated circuit intended for telephone applications, such as in speakerphones. It provides differential speaker outputs to maximize output swing at low ...WM8951L
The WM8951L is designed as one kind of low power stereo ADC that can be used in (1)wireless microphones; (2)voice recorders; (3)games console accessories applications. This device is controlled via a 2 or 3 wire serial i...X9428WP-2.7
The X9428WP-2.7 is one member of the X9428 family which is designed as the single digitally controlled potentiometer that can be used as a three-terminal potentiometer or as a two-terminal variable resistor in a wide var...WR12D12
The WR12D12 is one member of the WR family which is designed as the WR12D12 that accepts a wide input voltage range of 9 to 18VDC, 18 to 36VDC, and 36 to 72VDC. Also this device incorporates six sided continuous EMI/RFI ...ISL90810WIU8
The ISL90810WIU8 is one member of the ISL90810 family which is designed as the single digitally controlled potentiometer that can be used as three-terminal potentiometer or as two-terminal variable resistor in a wide var...AH175-WL-A
The AH175-WL-A is designed as one kind of single-digital-output Hall-effect sensor that can be used in (1)rotor position sensing; (2)current switch; (3)encoder; (4)RPM detection. This device includes an on-chip Hall volt...IDT74LVC245APG
The IDT74LVC245APG has been designed with a ±24mA output driver.This driver is capable of driving a moderate to heavy load while maintaining speed performance.All pins can be driven from either 3.3V or 5V devices.This fe...SN54LVC541ADB
The SN54LVC541ADB octal buffer/driver is designed for 2.7-V to 3.6-V Vcc operation.The SN54LVC541ADB devices are ideal for driving bus lines or buffering memory address registers.These device feature inputs and outputs o...74LVC245AMTR
The 74LVC245AMTR is a low voltage CMOS OCTAL BUS TRANSCEIVER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and ...74ALVC244D
The 74ALVC244D is a high performance,low power,low voltage Si-gate CMOS device and superior to most advanced CMOS compatible TTL families.The 74ALVC244D is an octal transceiver featuring non-inverting 3-state.The 3-stat...VKQ100MS3V3
The VKQ100MS3V3 DC/DC converter presents an economical and practical solution for distributed power system architectures and it require high power density and efficiency while maintaining system modularity and upgradeabi...MSM7578HRS
The MSM7578HRS belongs to MSM7578 and MSM7579 family which are single-channel CODEC CMOS ICs for voice signals ranging from 300 to 3400 Hz and these devices contain filters for A/D and D/A conversion. The devices use the...M25P10AVMN6
The M25P10AVMN6 is a kind of 1 Mbit, low voltage, serial flash memory. Every instruction sequence starts with a one-byte instruction code. Depending on the instruction, this might be followed by address bytes, or by data...M25P20VME3
The M25P20VME3 belongs to M25Pxx family which is a 512Kbit to 32Mbit (2M x 8) Serial Flash Memory, with advanced write protection mechanisms, accessed by a high speed SPI-compatible bus. The memory can be programmed 1 to...VG3617161BT
The VG3617161BT is fabricated with an advanced submicron CMOS technology and designed to operate from a single 3.3V power supply and which is CMOS synchronous dynamic RAM organized as 524,288-word X 16-bit X 2-bank. It i...MAX216CWN
The MAX216CWN is one member of the MAX216 family which is designed as the low power appletalk interface transceiver that can be used in (1)appletalk interfaces; (2)apple printer interfaces; (3)apple peripheral interface;...MAX512CPD
The MAX512CPD is one member of the MAX512 family which is designed as the low-cost, triple, 8-bit voltage-output DACs with serial interface that can be used in (1)digital gain and offset adjustment; (2)programmable atten...MC74LVX02DT
The MC74LVX02DT is one member of the MC74LVX02 series.The MC74LVX02 is an advanced high speed CMOS 2-input NOR gate.The inputs tolerate voltages up to 7V,allowing the interface of 5V systems to 3V systems.TOSHIBA is cont...MC74LVX08DT
The MC74LVX08DT is one member of the MC74LVX08 series.The MC74LVX08 is an advanced high speed CMOS 2-input AND gate.The inputs tolerate voltages up to 7V,allowing the interface of 5V systems to 3V systems.TOSHIBA is cont...MC74LVX00DT
The MC74LVX00DT is one member of the MC74LVX00 series.The MC74LVX00 is an advanced high speed CMOS 2-input AND gate.The inputs tolerate voltages up to 7V,allowing the interface of 5V systems to 3V systems.TOSHIBA is cont...TC74LVX245F
The TC74LVX245F is one member of the TC74LVX245 series.The TC74LVX245 is a high speed CMOS OCTAL BUS TRANSCEIVER fabricated using silicon gate CZMOS technology.Designed for use in 3.3 Volt systems, it achieves high speed...MC14174BF
The MC14174BF is one member of the MC14174 family which is designed as the hex type D flip–flop that contains protection circuitry to guard against damage due to high static voltages or electric fields. This device is co...MC10EP05DTR2
The MC10EP05DTR2 is designed as one kind of 2 input differential AND/NAND gate that is functionally equivalent to the EL05 and LVEL05 devices. Features of this device are:(1)220 ps typical propagation delay; (2)maximum f...MC10E155FN
The MC10E155FN is one member of the MC10E155 family which is designed as the 6 bit 2:1 mux-latch that contains six 2:1 multiplexers followed by transparent latches with single-ended outputs. Features of this device are:(...2SA1346
The 2SA1346 is designed as one kind of PNP / NPN epitaxial planar silicon transistor that can be used in switching citcuit, inverter, interface circuit and driver. Features of the 2SA1346 are:(1)built-in bias resistor (R...2SB1142S
The 2SB1142S is designed as one kind of PNP / NPN epitaxial planar silicon transistor that can be used in 50 V / 2.5 A high speed switching applications. Features of the 2SB1142S are:(1)adoption of FBET and MBIT processe...VP1120N1
The VP1120N1 is designed as one kind of P-channel enhancement-mode vertical DMOS power FETs. This enhancement mode (normally off) power transistors utilize a vertical DMOS structure and supertex's well-proven silicon-gat...CS5529-AS
The CS5529-AS is designed as a 16-bit low power programmable anolog to digital converter (ADC) which includes coarse/fine charge buffers, a fourth order modulator, a calibration microcontroller, a digital filter with pro...VR1101W
The VR1101W is designed as one kind of super bright chip LEDs with surface mount. Its typical applications include telephones, AV equipment and OA equipment.It has five features. (1)Ultra compact (single color 1.5mmx3mm,...CXA1547Q
The CXA1547Q is designed as one kind of high speed and low noise transimpedance amplifier which particularly suitable for signal recovery in fiber-optic receivers. Typical applications include fiber-optic receiver and in...DS14C88N
The DS14C88N which would be pin-for-pin compatible to the DS1488/MC1488 is designed as a quad line drivers designed to interface data terminal equipment (DTE) with data circuit-terminating equipment (DCE). This device tr...MC10H176FN
The MC10H176FN is designed as one kind of hex D master-slave flip-flops which contains six master slave type D flip–flops with a common clock. This MECL 10H part is a functional/pinout duplication of the standard MECL 10...MSM5839BGS
The MSM5839BGS is a dot matrix LCD segment driver LSI which is fabricated using low power CMOS metal gate technology. This LSI consists of two 20-bit shift registers, two 20-bit latches,a 40-bit level shifter and a 40-bi...CS8156YTHA5
The CS8156YTHA5 is a low dropout 12V/5V dual output linear regulator. The 12V±5% output sources 750mA and the 5V±2.0% output sources 100mA. The features of CS8156YTHA5can be summarized as (1)Two regulated outputs: 12V ±5...CY7B131
The CY7B131 is a high-speed BICMOS 1k by 8 dual-port static RAMs. The features of CY7B131 can be summarized as (1)0.8-micron BICMOS for high performance; (2)automatic power-down; (3)capable of withstanding greater than 2...BA5912BFP
The BA5912BFP is a power driver fot CD-ROM.It's structure is silicon monolithic integrated circuit. Features of the BA5912BFP are:(1)driver exclusively for the 2-ch BTL;(2)use of an HSOP25PIN power package can achieve d...TSC80C51C-44CC
The TSC80C51C-44CC is high performance SCMOS versions of the 8051 NMOS single chip 8bit μC.It allows to reduce system power consumption by bringing the clock frequency down to any value,even DC,without loss of data.It is...AM27C64-255DC
The Am27C64 is a 64-Kbit cmos eprom,ultraviolet erasable pro-grammable read-only memory.It is organized as 8K words by 8 bits per word,operates from a single +5V supply,has a static standby mode, and features fast single...1N5368DTR
The 1N5368DTR is a 5.0 watt Zeners provides voltage regulation in a selection from 3.3 to 200 volts with different tolerances as identified by specific suffix letter on the part number.These plastic encapsulated Zene...IDT6198L45D
The IDT6198L45D is one of the IDT6198 series.The IDT6198 is a 65,536-bit high-speed static RAM organized as 16K x 4. It is fabricated using IDT’s high-performance, high-reliability technology—CMOS. This state-of-theart t...LB1245
The LB1245 has been designed for interfacing low-level digital devices to fluorescent display tubes.Its 8-channel independent darlington output stage is used for digit and segment drivers.Equivalent pull-down resistors a...BA7665AFS
The BA7665AFS is a 3channel 75Ω driver for dvd ,silicon monolithic integrated circuit. Features of the BA7665AFS are:(1)a low consumption electric power movement; (2)output mute circuit built-in; (3)the power save circu...C0805C103M2GAC
The C0805C103M2GAC is a ceramic chip/standard. Features of the C0805C103M2GAC are:(1)C0G (NP0), X7R, Z5U and Y5V Dielectrics; (2)10, 16, 25, 50, 100 and 200 Volts; (3)Standard End Metalization: Tin-plate over nickel bar...IRLR110A
The IRLR110A is one of the IRLR110 series. The IRLR110A is a hexfet power mosfet.Third generation hexfets from international rectifier provide the designer with the best combination of fast switching,ruggedized device d...CY74FCT2543TSOIC
The CY74FCT2543TSOIC is one of the CY74FCT2543T series.The FCT2543T Octal Latched Tranceiver contains two sets of eight D-type latches.The outputs are designed with a power-off disable feature to allow for live insertion...2SK1920
The 2SK1920 is a n-channel MOS silicon fet,very high-speed,switching applications. Features of the 2SK1920 are:(1)low on resistance; (2)very high-speed switching; (3)low-voltage drive. The absolute maximum ratings of t...LB1249
The LB1249 is an active-low input,8-unit,high-current,low-saturation driver. Features of the LB1249 are:(1)low active input type; (2)on-chip input protecting diodes; (3)high current capacity(400mA) and low saturation ...KSM-911LJ
The KSM-911LJ is consists of a PIN Photodiode of high speed and a preamplifier IC in the package as an receiver for Infrared remote control systems. And this device can be used in (1)audio & video applications (TV, V...XWM8711EDS
The XWM8711EDS is designed as one kind of low power stereo DAC that belongs to the WM8711 family. This device is controlled via a 2 or 3 wire serial interface and the interface provides access to all features including v...BR93C46-TWMN7TP
The BR93C46-TWMN7TP is one member of the BR93C46 family which is designed as the microwire BUS serial EEPROM with the silicon monolithic integrated circuit structure. Features of this device are:(1)microwire BUS interfac...TPS76850QPWPREP
The TPS76850QPWPREP is one member of the TPS75201 family which is designed as the 2-A low-dropout voltage regulator with integrated power-on reset and power good (PG) functions respectively. This device is enabled when t...WS1M32-25G3M
The WS1M32-25G3M is one member of the WS1M32 family which is designed as the 1M x 32 SRAM module. Features of this device are:(1)access times of 17 ns, 20 ns, 25 ns;(2)packaging: 84 lead, 28 mm CQFP and 66 pin PGA type, ...DS1230WP-150-IND
The DS1230WP-150-IND is one member of the DS1230WP family which is designed as the 262,144-bit, fully static, nonvolatile SRAM that can be used in place of existing 32k x 8 static RAMs directly conforming to the popular ...SNJ54LVC257AW
The SNJ54LVC257A series are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-oranized systems.The 3-state outputs do not load the data lines when the output enable(OE) input is at a hig...74LVC244ATTR
The 74LVC244ATTR is a low voltage CMOS OCTAL BUS BUFFER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for 1.65 to 3.6 VCC operations and low power and low n...