3861QR, 3861UA3861APC, 3862 Selling Leads, Datasheet
MFG:300 Package Cooled:* D/C:98+
3861QR, 3861UA3861APC, 3862 Datasheet download
Part Number: 3861QR
MFG: 300
Package Cooled: *
D/C: 98+
MFG:300 Package Cooled:* D/C:98+
3861QR, 3861UA3861APC, 3862 Datasheet download
MFG: 300
Package Cooled: *
D/C: 98+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: 3860
File Size: 404767 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: 3860
File Size: 404767 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: 3860
File Size: 404767 KB
Manufacturer:
Download : Click here to Download
3862 is a kind of 1/2" diameter single-turn panel control with five unique festures: The first one is small diameter ; The second one is wide resisitance range; The third one is good resolution ; The forth one is linear tapers; The fifth one is cermet element.
At the same time , there are some characteristics about it.First one is initial electrical characteristics: Standard Resistance Range is from 100 ohms to 1 megohm; Total Resistanse Tolerance is (A Taper)±10%; Independence Linearity is±5%;Absolute Minmum Resisitance is 2 ohms maximum; Effective Electrical Angle is 260°± 10°; Contact Resistance Variation is ±3% of total resistance; Insulation Resistance(500 VDC )is 1000 megohms minmum; Theoretical Resolution is esstantially infinite. Second one is environmental characteristics: Operating Temperature Range is from -1 °C to +125 °C; Storage Temperature Range is from -65 °C to +125 °C; Temperature Coefficient Over Storage Temperature Range is ±150 ppm/°CVibration is 20 G ,Total Resistance Shift is ±2 % maximum, Voltage Ratio Shift is ±6 % maximum; Shock is 50 G ,Total Resistance Shift is ±2 % maximum , Voltage Ratio Shift is ±6 % maximum; Load Life is 1,000 hours; Total Resistance Shift is ±3 % maximum; Rotational Life (C & N Bushing) No Load is 50,000 cycles, Total Resistance Shift is ±5 % maximum, Contact Resistance Variation is ±3 %; Moisture Resistance (MIL-STD-202, Method 106, Condition B),Total Resistance Shift is±2 % maximum, Insulation Resistance (500 VDC) is 100 megohms minimum; Salt Spray is MIL-STD-202, Method 101, Condition A; IP Rating is IP 40.Third one is mechanical characteristics: Stop Strength is 33 N-cm (3 lb.-in.) maximum; Mechanical Angle is 295 ° ±3 °; Torque: Starting and Running is 3.53 N-cm (5 oz.-in.) maximum; Mounting (Torque on Bushing) is 1.7-2.0 N-m (15-18 lb.-in.) maximum; Shaft Locking Torque with Locking Bushings is 14.12 N-cm (20 oz.-in.); Weight (Single Section) is 25 grams maximum(Each Additional Section); Terminals is printed circuit pins or J-Hooks, Soldering Condition is recommended hand soldering using Sn85/Ag5 no clean solder, 0.025 " wire diameter Maximum temperature 399 °C (750 °F) for 3 seconds. No wash process to be used with no clean flux.Part can be wave soldered at 260 °C (500 °F) for 5 seconds, no wash process with no clean flux; Marking is manufacturer's trademark, wiring diagram, date code, resistance, manufacturer's part number; Ganging is 1 cup maximum; Hardware is one lockwasher and one mounting nut is shipped with each potentiometer, except where noted in the part number.
If you are interested in 3862 , please pay more attention to our web , and thanks for your concern !