AS1150, AS1150-T, AS1152 Selling Leads, Datasheet
MFG:AUSTRIAMICRO Package Cooled:TSSOP16 D/C:2007
AS1150, AS1150-T, AS1152 Datasheet download

Part Number: AS1150
MFG: AUSTRIAMICRO
Package Cooled: TSSOP16
D/C: 2007
MFG:AUSTRIAMICRO Package Cooled:TSSOP16 D/C:2007
AS1150, AS1150-T, AS1152 Datasheet download

MFG: AUSTRIAMICRO
Package Cooled: TSSOP16
D/C: 2007
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: AS1
File Size: 846620 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: AS1
File Size: 846620 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: AS1
File Size: 846620 KB
Manufacturer:
Download : Click here to Download
The AS1150 and AS1151 are quad flow-through LVDS (low-voltage differential signaling) receivers which accept LVDS differential inputs and convert them to LVCMOS outputs. The receivers are perfect for low-power low-noise applications requiring high signalling rates and reduced EMI emissions.
The devices are guaranteed to receive data at speeds up to 500Mbps (250MHz) over controlled impedance media of approximately 100. Supported transmission media are PCB traces, backplanes, and cables.
The AS1150 uses high impedance inputs and requires an external termination resistor when used in a point-topoint connection. The AS1151 features integrated parallel termination resistors (nominally 107), which eliminate the requirement for discrete termination resistors, and reduce stub lengths.
The integrated failsafe feature sets the output high if the inputs are open, undriven and terminated, or undriven and shorted. Enable inputs (EN and ENn internally pulled down to GND) control the high-impedance output and are common to all four receivers. All inputs conform to the ANSI TIA/EIA- 644 LVDS standards. Flow-through pinout simplifies PC board layout and reduces crosstalk by separating the LVDS inputs and LVCMOS outputs.
The devices are available in a 16-pin TSSOP package.

The AS1152 is a Quad Flow-Through LVDS (Low-Voltage Differential Signaling) Line Driver which accepts and converts LVTTL/LVCMOS input levels into LVDS output signals. The device is perfect for low-power low-noise applications requiring high signaling rates and reduced EMI emissions.
The device is guaranteed to transmit data at speeds up to 500Mbps (250MHz) over controlled impedance media of approximately 100. Supported transmission media are PCB traces, backplanes, and cables.
The AS1152 is capable of setting all four outputs to a high-impedance state through two Enable Inputs (EN and ENn internally pulled down to GND), dropping the device to an ultra-low-power state of 16mW (typical) during high impedance. The Enable Inputs are common to all four drivers.
Outputs conform to the ANSI TIA/EIA-644 LVDS standards. Flow-through pinout simplifies PC board layout and reduces crosstalk by separating the LVTTL/LVCMOS inputs and LVDS outputs.
The AS1152 operates from a single +3.3V supply and is specified for operation from -40 to +85°C.

