BA4228, BA4228L, BA4230 Selling Leads, Datasheet
MFG:ROHM Package Cooled:SIP D/C:1987
BA4228, BA4228L, BA4230 Datasheet download

Part Number: BA4228
MFG: ROHM
Package Cooled: SIP
D/C: 1987
MFG:ROHM Package Cooled:SIP D/C:1987
BA4228, BA4228L, BA4230 Datasheet download

MFG: ROHM
Package Cooled: SIP
D/C: 1987
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: BA4228L
File Size: 453904 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: BA4228L
File Size: 453904 KB
Manufacturer:
Download : Click here to Download
PDF/DataSheet Download
Datasheet: BA4230
File Size: 226979 KB
Manufacturer:
Download : Click here to Download
The BA4228L is a single-chip FM/AM IF system designed for use in 3 V radios.The FM block of the device consists of a differential IF amplifier,quadrature detector and IF soft muting circuit for weak input.The AM block consists of a local oscillator,IF amplifier,detector and AGC network.The device also contains an audio amplifier.The typical applications include FM/AM portable radios and headphone radio cassette recorders.
There are some features as follows.First is capable of withstanding supply voltage drops (down to VCC=1.5 V typ when VOUT=-3 dB).Secondly,built-in FM muting network suppresses inter-station noise and off-tuned side peaks.The muting level can be adjusted with an external resistor.Besides,single-pin output for FM and AM circuits allow coupling to the following stage (MPX,etc) without the need for a selector switch.Furthermore,low-pass filter pin dedicated to the AM circuitry enables independent frequency response settings for FM and AM blocks.This facilitates coupling to the demultiplexer circuit.At last,the switching between FM and AM modes can be controlled by a DC level (on/off).
What comes next is about the absolute maximum ratings (Ta=25).The VCC (supply voltage) is 4.5 V.The Pd (power dissipation) is 500 mW.The Topr (operating temperature range) is from -25 to 75.The Tstg (storage temperature range) is from -55 to +125.Then is about the recommended operating conditions (Ta=25).The minimum VCC (supply voltage) is 1.8 V,the typical is 3 V and the maximum is 3.6 V.
The following is about the electrical characteristics of FM Block (Ta=25,VCC=3 V).The typical IQ (quiescent current) is 7 mA and the maximum is 12 mA when muting off.The minimum VOUT (detector output) is 55 mV,the typical is 85 mV and the maximum is 115 mV at VIN=100 dBV,10.7 MHz,f=22.5 kHz,fm=1 kHz.The typical THD (total harmonic distortion) is 0.25% and the maximum is 0.75% at VIN=100 dBV,10.7 MHz,f=22.5 kHz,fm=1 kHz.The minimum S/N (signal to noise ratio) is 60 dB and the typical is 68 dB at VIN=100 dBV,10.7 MHz,f=22.5 kHz,fm=1 kHz.
