Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The Fairchild Switch FSTU32X384 provides 20 bits of highspeed CMOS TTL-compatible bus switches. The low OnResistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device is organized as four 5-bit switches with separate bus enable (OE) signals. When OE is LOW, the switch is ON and Port A is connected to Port B. When OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports.
The A and B Ports are protected against undershoot to support an extended range to 2.0V below ground. Fairchild's integrated Undershoot Hardened Circuit (UHC) senses undershoot at the I/O and responds by preventing voltage differentials from developing and turning the switch on.
FSTU32X384 Maximum Ratings
Supply Voltage (VCC) −0.5V to +7.0V DC Switch Voltage (VS) −0.5V to +7.0V DC Input Voltage (VIN) (Note 2) −0.5V to +7.0V DC Input Diode Current (IIK) VIN < 0V −50 mA DC Output (IOUT) Sink Current 128 mA DC VCC/GND Current (ICC/IGND) ± 100 mA Storage Temperature Range (TSTG) −65°C to +150°C
FSTU32X384 Features
·4Ω switch connection between two ports · Minimal propagation delay through the switch · Ultra low power with < 0.1 µA typical ICC · Zero ground bounce in flow-through mode · Control inputs compatible with TTL level · See Application Note AN-5008 for details on FSTU - Undershoot Protected Fairchild Switch Family