GS1560A, GS1574, GS1578 Selling Leads, Datasheet
MFG:GENNUM Package Cooled:TSOP D/C:04+
GS1560A, GS1574, GS1578 Datasheet download
Part Number: GS1560A
MFG: GENNUM
Package Cooled: TSOP
D/C: 04+
MFG:GENNUM Package Cooled:TSOP D/C:04+
GS1560A, GS1574, GS1578 Datasheet download
MFG: GENNUM
Package Cooled: TSOP
D/C: 04+
Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
TOP
PDF/DataSheet Download
Datasheet: GS1560A*
File Size: 944165 KB
Manufacturer: Gennum
Download : Click here to Download
PDF/DataSheet Download
Datasheet: GS100T300
File Size: 93441 KB
Manufacturer: STMICROELECTRONICS [STMicroelectronics]
Download : Click here to Download
PDF/DataSheet Download
Datasheet: GS100T300
File Size: 93441 KB
Manufacturer: STMICROELECTRONICS [STMicroelectronics]
Download : Click here to Download
The GS1560A is a reclocking deserializer with a serial loopthrough cable driver. When used in conjunction with the GS1524 Automatic Cable Equalizer and the GO1525 Voltage Controlled Oscillator, a receive solution can be realized for HD-SDI, SD-SDI and DVB-ASI applications.
In addition to reclocking and deserializing the input data stream, the GS1560A performs NRZI-to-NRZ decoding, descrambling as per SMPTE 292M/259M-C, and word alignment when operating in SMPTE mode. When operating in DVB-ASI mode, the device will word align the data to K28.5 sync characters and 8b/10b decode the received stream.
Two serial digital input buffers are provided with a 2x1 multiplexer to allow the device to select from one of two serial digital input signals.
The integrated reclocker features a very wide Input Jitter Tolerance of ±0.3 UI (total 0.6 UI), a rapid asynchronous lock time, and full compliance with DVB-ASI data streams.
A integrated cable driver is provided for serial input loopthrough applications and can be selected to output either buffered or reclocked data. This cable driver also features an output mute on loss of signal, high impedance mode, adjustable signal swing, and automatic dual slew-rate selection depending on HD/SD operational requirements.
The GS1560A also includes a range of data processing functions such as error detection and correction, automatic standards detection, and EDH support. The device can also detect and extract SMPTE 325M payload identifier packets and independently identify the received video standard. This information is read from internal registers via the host interface port.
Line-based CRC errors, line number errors, TRS errors, EDH CRC errors and ancillary data checksum errors can all be detected. A single 'DATA_ERROR' pin is provided which is a logical 'OR'ing of all detectable errors. Individual error status is stored in internal 'ERROR_STATUS' registers.
Finally, the device can correct detected errors and insert new TRS ID words, line-based CRC words, ancillary data checksum words, EDH CRC words, and line numbers. Illegal code re-mapping is also available. All processing function may be individually enabled or disabled via host interface control.
PARAMETER | VALUE/UNITS |
Supply Voltage Core | -0.3V to +2.1V |
Supply Voltage I/O | -0.3V to +4.6V |
Input Voltage Range (any input) | -2.0V to + 5.25V |
Ambient Operating Temperature | -20°C < TA < 85°C |
Storage Temperature | -40°C < TSTG < 125°C |
Lead Temperature (soldering, 10 sec) | 230°C |
The GS1574 is a second-generation high-speed bipolar integrated circuit designed to equalize and restore signals received over 75 co-axial cable.
The GS1574 is designed to support SMPTE 292M, SMPTE 344M and SMPTE 259M, and is optimized for performance at 270Mb/s and 1.485Gb/s.
The GS1574 features DC restoration to compensate for the DC content of SMPTE pathological test patterns.
A voltage programmable mute threshold (MCLADJ) is included to allow muting of the GS1574 output when an approximate selected cable length is reached for SMPTE 259M signals. This feature allows the GS1574 to distinguish between low amplitude SD-SDI signals and noise at the input of the device. The serial digital outputs of the GS1574 may be forced to a mute state by applying a voltage to the MUTE pin.
Power consumption is typically 270mW using a 3.3V power supply. The GS1574 is lead-free, and the encapsulation compound does not contain halogenated flame retardant.
Parameter | Value |
Supply Voltage | -0.5V to +3.6 VDC |
Input ESD Voltage (Human Body Model) | 500V |
Storage Temperature Range | -50 < Ts < 125 |
Input Voltage Range (any input) | -0.3 to (VCC +0.3)V |
Operating Temperature Range | 0 to 70 |
Power Dissipation | 300mW |
Lead Temperature (soldering, 10 sec) | 260 |