Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The HCPL05XX, and HCPL04XX optocouplers consist of an AlGaAs LED optically coupled to a high speed photodetector transistor housed in a compact 8-pin small outline package.
A separate connection for the bias of the photodiode improves the speed by several orders of magnitude over conventional phototransistor optocouplers by reducing the base-collector capacitance of the input transistor. The HCPL04XX devices do not have the base bonded out to a lead for additional noise margin. The HCPL053X devices have two channels per package for optimum mounting density.
HCPL0530 Maximum Ratings
Parameter
Symbol
Value
Units
Storage Temperature
TSTG
-40 to +125
Operating Temperature
TOPR
-40 to +85
Reflow Temperature Profile (Refer to page 9)
EMITTER
DC/Average Forward Input Current
IF(avg)
25
mA
Peak Forward Input Current (50% duty cycle, 1 ms P.W.)
IF(pk)
50
mA
Peak Transient Input Current - ([ 1 s P.W., 300 pps)
IF(trans)
1.0
A
Reverse Input Voltage
VR
5
V
Input Power Dissipation
PD
45
mW
DETECTOR
Average Output Current (Pin 6)
IO(avg)
8
mA
Peak Output Current
IO(pk)
16
mA
Emitter-Base Reverse Voltage (HCPL0500/HCPL0501 only)
VEBR
5
V
Supply Voltage
VCC
-0.5 to 30
V
Output Voltage
VO
-0.5 to 20
V
Base Current (HCPL0500/HCPL0501 only)
IB
5
mA
Output power dissipation
PD
100
mW
HCPL0530 Features
• High speed 1 MBit/s • 15kV/s minimum commone mode transient immunity at VCM =1500V (HCPL0453/0534) • Open collector output • Guaranteed performance over temperature: 0 to 70 • U.L. recognized (File # E90700) • VDE0884 recognized (file#136616) approval pending for HCPL0530/0531/0453 ordering option V, e.g., HCPL0500V • BSI recognized (file# 8661, 8662) HCPL0452/0500/0501 only
HCPL0530 Typical Application
• Line receivers • Pulse transformer replacement • Output interface to CMOS-LSTTL-TTL • Wide bandwidth analog coupling
These dual channel optocouplers contain a pair of light emitting diodes and integrated photodetectors with electrical insulation between input and output.
Separate connection for the photodiode bias and output transistor collectors increase the speed up to a hundred times that of a conventional phototransistor coupler by reducing the basecollector capacitance.
HCPL-0530 Maximum Ratings
Parameter
Symbol
Device
Min.
Max.
Units
Note
Storage Temperature
TS
55
125
Operating Temperature†
TA
- 55
100
Average Forward Input Current (each channel)
IF(AVG)
25
mA
Peak Forward Input Current (each channel) (50% duty cycle, 1 ms pulse width)
IF(PEAK)
50
mA
Peak Transient Input Current (each channel) (£1 ms pulse width, 300 pps)
IF(TRANS)
5
A
Reverse LED Input Voltage (each channel)
VR
1
V
Input Power Dissipation (each channel)
PIN
45
mW
Average Output Current (each channel)
IO(AVG)
8
mA
Peak Output Current
IO(PEAK)
16
mA
Supply Voltage (Pin 8-5)
VCC
-0.5
30
V
Output Voltage (Pins 7-5, 6-5)
VO
-0.5
20
V
Output Power Dissipation (each channel)
PO
35
mW
13
Lead Solder Temperature (Through-Hole Parts Only) 1.6 mm below seating plane, 10 seconds
TLS
8-Pin DIP
260
Reflow Temperature Profile
TRP
SO-8 and Option 300
See Package Outline Drawings section
HCPL-0530 Features
• 15 kV/ms Minimum Common Mode Transient Immunity at VCM = 1500 V (HCPL-4534/0534) • High Speed: 1 Mb/s • TTL Compatible • Available in 8 Pin DIP, SO-8, and 8 Pin DIP Gull Wing Surface Mount (Option 020) Packages • High Density Packaging • 3 MHz Bandwidth • Open Collector Outputs • Guaranteed Performance from 0 to 70 • Safety Approval UL Recognized 2500 V rms for 1 minute (5000 V rms for 1 minute for Option 020) per UL1577 CSA Approved • Single Channel Version Available (4502/3, 0452/3) • MIL-STD-1772 Version Available (55XX/65XX/4N55)
HCPL-0530 Typical Application
• Line Receivers High Common Mode Transient Immunity (>1000 V/ms) and Low Input-Output Capacitance (0.6 pF) • High Speed Logic Ground Isolation TTL/TTL, TTL/ LTTL, TTL/CMOS, TTL/LSTTL • Replace Pulse Transformers Save Board Space and Weight • Analog Signal Ground Isolation Integrated Photon Detector Provides Improved Linearity over Phototransistor Type • Polarity Sensing • Isolated Analog Amplifier Dual Channel Packaging Enhances Thermal Tracking