Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The HCPL06XX optocouplers consist of an AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output (single channel devices). The devices are housed in a compact small-outline package. This output features an open collector, thereby permitting wired OR outputs. The HCPL0600 and HCPL0601 output consists of bipolar transistors on a bipolar process while the HCPL0611, HCPL0630 and HCPL0631 output consists of bipolar transistors on a CMOS process for reduced power consumption. The coupled parameters are guaranteed over the temperature range of - 40 to +85. A maximum input signal of 5 mA will provide a minimum output sink current of 13 mA (fan out of 8). An internal noise shield provides superior common mode rejection.
HCPL0630 Maximum Ratings
Parameter
Symbol
Value
Units
Storage Temperature
TSTG
-40 to +125
Operating Temperature
TOPR
-40 to +85
EMITTER DC/Average Forward Input Current (each channel)
Single Channel
IF
50
mA
Dual Channel
Enable Input Voltage Not to exceed VCC by more than 500 mV
Single Channel
VE
5.5
V
Reverse Input Voltage (each channel)
VR
5.0
V
Power Dissipation
Single Channel
PI
45
mW
Dual Channel
DETECTOR Supply Voltage
VCC (1minute max)
7.0
V
Output Current (each channel)
IO
50
mA
Output Voltage (each channel)
VO
7.0
V
Collector Output Power Dissipation
Single Channel
PO
85
mW
Dual Channel
HCPL0630 Features
` Compact SO8 package ` Very high speed-10 MBit/s ` Superior CMR ` Fan-out of 8 over -40 to +85 ` Logic gate output ` Strobable output (single channel devices) ` Wired OR-open collector ` U.L. recognized (File # E90700) ` VDE approval pending
HCPL0630 Typical Application
· Ground loop elimination · LSTTL to TTL, LSTTL or 5-volt CMOS · Line receiver, data transmission · Data multiplexing · Switching power supplies · Pulse transformer replacement · Computer-peripheral interface
The HCPL-0630 is a optically coupled gate that combines a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky-clamped transistor.
This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40 degrees C to 85 degrees C allowing troublefree system performance.
HCPL-0630 is suitable for high speed logic interfacing, input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and is recommended for use in extremely high ground or induced noise environments.
HCPL-0630 Features
• Available in 8 Pin DIP and SOIC-8 • Internal Shield for High Common Mode Rejection (CMR) HCPL-2631/0631: 10,000 V/ms @ VCM = 50 V HCPL-4661/0661: 15,000 V/ms @ VCM = 1000 V • High Density Packaging • Low Input Current Capability: 5 mA • High Speed: 10 MBd • LSTTL and TTL Compatible • Guaranteed AC and DC Performance Over Temperature: -40°C to 85°C • Recognized Under the Component Program of UL1577 (File No. E55361) for Dielectric Withstand Proof Test Voltages of 2500 Vrms, 1 Minute • 5000 Vrms, 1 Minute (Option 020) (HCPL-2630/ 2631/4661) • CSA Approved Under Component Acceptance Notice No. 5 (File No. CA 88324) (HCPL-2630/2631/ 4661) • Hermetic Equivalent Device Available (HCPL- 5630/31) • Surface Mount Gull Wing Option Available for 8 Pin DIP (Option 300)
HCPL-0630 Typical Application
• Isolation of High Speed Logic Systems • Microprocessor System Interfaces • Isolated Line Receiver • Computer-Peripheral Interfaces • Ground Loop Elimination • Digital Isolation for A/D, D/A Conversion • Power Transistor Isolation in Motor Drives