Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The HCS360 is a code hopping encoder designed for secure Remote Keyless Entry (RKE) systems. The HCS360 utilizes the KEELOQ code hopping technology, which incorporates high security, a small package outline and low cost, to make this device a perfect solution for unidirectional remote keyless entry systems and access control systems.
The HCS360 combines a 32-bit hopping code generated by a nonlinear encryption algorithm, with a 28/32-bit serial number and 7/3 status bits to create a 67-bit transmission stream. The length of the transmission eliminates the threat of code scanning and the code hopping mechanism makes each transmission unique, thus rendering code capture and resend (code grabbing) schemes useless.
The encryption key, serial number, and configuration data are stored in EEPROM which is not accessible via any external connection. This makes the HCS360 a very secure unit. The HCS360 provides an easy to use serial interface for programming the necessary security keys, system parameters, and configuration data.
The encryption keys and code combinations are programmable but read-protected. The keys can only be verified after an automatic erase and programming operation. This protects against attempts to gain access to keys and manipulate synchronization values. The HCS360 operates over a wide voltage range of 2.0V to 6.6V and has four button inputs in an 8-pin configuration. This allows the system designer the freedom to utilize up to 15 functions. The only components required for device operation are the buttons and RF circuitry, allowing a very low system cost.
HCS360 Maximum Ratings
Symbol
Item
Rating
Units
VDD
Supply voltage
-0.3 to 6.9
V
VIN
Input voltage
-0.3 to VDD + 0.3
V
VOUT
Output voltage
-0.3 to VDD + 0.3
V
IOUT
Max output current
25
mA
TSTG
Storage temperature
-55 to +125
(Note)
TLSOL
Lead soldering temp
300
(Note)
VESD
ESD rating
4000
V
Note: Stresses above those listed under "ABSOLUTE MAXIMUM RATINGS" may cause permanent damage to the device.
HCS360 Features
• Programmable 28/32-bit serial number • Programmable 64-bit encryption key • Each transmission is unique • 67-bit transmission code length • 32-bit hopping code • 35-bit fixed code (28/32-bit serial number, 4/0-bit function code, 1-bit status, 2-bit CRC) • Encryption keys are read protected Operating • 2.0-6.6V operation • Four button inputs - 15 functions available • Selectable baud rate • Automatic code word completion • Battery low signal transmitted to receiver • Nonvolatile synchronization data • PWM and Manchester modulation Other • Easy to use programming interface • On-chip EEPROM • On-chip oscillator and timing components • Button inputs have internal pull-down resistors • Current limiting on LED output • Minimum component count Enhanced Features Over HCS300 • 48-bit seed vs. 32-bit seed • 2-bit CRC for error detection • 28/32-bit serial number select • Two seed transmission methods • PWM and Manchester modulation • IR modulation mode