Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The HSDL-4271 Infrared emitter was designed for applications that require high power and low forward voltage. It utilizes Aluminum Galium Arsenide (AlGaAs) LED technology and is optimized for efficiency at emission wavelengths of 940 nm. The material used produces high radiant efficiency over a wide range of currents. The emitter is packaged in clear T-1¾ (5mm) package.
HSDL-4271 Maximum Ratings
Parameter
Symbol
Minimum
Maximum
Unit
Reference
Peak Forward Current
IFPK
-
350
mA
Duty cycle = 20% period = 200us
Forward Current
IFDC
-
100
mA
Power Dissipation
PDISS
-
200
mW
Reverse Voltage
VR
5
-
V
IR=100UA
Storage Temperature
TS
-40
100
LED Junction Temperature
TJ
110
Lead Soldering Temperature
260 for 5 sec
Notes: 1. Derate as shown in Figure 6.
HSDL-4271 Features
• High Power AlGaAs LED Technology • 940 nm Wavelength • T-1¾ Package • Low Cost • Low Forward Voltage: 1.2V at 20mA
HSDL-4271 Typical Application
• Industrial Infrared Equipments and Applications (Smoke Detectors etc) • Consumer Electronics (Infrared Remote Controller etc) • Infrared spotlight for cameras • Discrete Interrupters • Infrared source for optical counters and card readers
HSDL-4400 Parameters
Technical/Catalog Information
HSDL-4400
Vendor
Lite-On Inc
Category
Optoelectronics
Voltage - Forward (Vf) Typ
-
Current - DC Forward (If)
100mA
Wavelength
875nm
Viewing Angle
110°
Radiant Intensity (Ie) Min @ If
9mW @ 50mA
Mounting Type
Surface Mount
Package / Case
Non-Standard SMD
Orientation
Top View
Packaging
Bulk
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
HSDL 4400 HSDL4400
HSDL-4400 General Description
Flat Top Package The HSDL-4400 Series of flat top IR emitters use an untinted, nondiffused, truncated lens to provide a wide radiation pattern that is useful for short distance communication where alignment of the emitter and detector is not critical. The HSDL-5400 Series of flat top IR detectors uses the same truncated lens design as the HSDL-4400 Series of IR emitters with the added feature of a black tint that acts as an optical filter to reduce the effects of ambient light, such as sun, incandescent and fluorescent light from interfering with the IR signal.
Dome Package The HSDL-4420 Series of dome IR emitters uses an untinted, nondiffused lens to provide a 24 degree viewing angle with high on-axis intensity. The HSDL-5420 Series of IR detectors uses the same lens design as the HSDL- 4420 IR emitter and optical filter used in the HSDL-5400 IR detector.
Lead Configuration All of these devices are made by encapsulating LED and PIN photodiode chips on axial lead frames to form molded epoxy subminiature packages. A variety of lead configurations is available and includes: surface mount gull wing, yoke lead, or Z-bend and through hole lead bends at 2.54 mm (0.100 inch) center spacing.
Technology The subminiature solid state emitters utilize a highly optimized LED material, transparent substrate aluminum gallium arsenide, TS AlGaAs. This material has a very high radiant efficiency, capable of producing high light output over a wide range of drive currents and temperature.
Lead Solder Temperature [1.6 mm (0.063 in.) from body]
260/5 s
Reflow Soldering Temperatures Convection IR Vapor Phase
235/90 s 215/180 s
HSDL-4400 Features
• Subminiature Flat Top and Dome Package Size 2x2 mm • IR Emitter 875 nm TS AlGaAs Intensity 17 mW/sr Speed 40 ns • Wide Range of Drive Currents 500 mA to 500 mA • IR Detector PIN Photodiode High Sensitivity Speed 7.5 ns • Flexible Lead Configurations Surface Mount or Through Hole
HSDL-4400 Typical Application
• Short Distance IR Links • IrDA Compatible • Small Handheld Devices Pagers Industrial Handhelds • Diffuse LANs • Wireless Audio