Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The ICS571 is a high speed, high output drive, low phase noise Zero Delay Buffer (ZDB) which integrates ICS' proprietary analog/digital Phase ocked Loop (PLL) techniques. ICS introduced the world standard for these devices in 1992 with the debut of the AV9170, and updated that with the ICS570. The ICS571, part of ICS' ClockBlocks™ family, was designed to operate at higher frequencies, with faster rise and fall times, and with lower phase noise. The zero delay feature means that the rising edge of the input clock aligns with the rising edges of both outputs, giving the appearance of no delay through the device. There are two outputs on the chip, one being a low-skew divide by two of the other.
The chip is ideal for synchronizing outputs in a large variety of systems, from personal computers to data communications to video. By allowing offchip feedback paths, the ICS571 can eliminate the delay through other devices. The use of dividers in the feedback path will enable the part to multiply by more than two.
ICS571 Maximum Ratings
Parameter
Conditions
Minimum
Typical
Maximum
Unit
Supply Voltage, VDD
Referenced to GND
7
V
Inputs
Referenced to GND
0.5
VDD+0.5
V
Clock Output
Referenced to GND
0.5
VDD+0.5
V
Ambient Operating Temperature
0
70
Soldering Temperature
Max of 10 seconds
260
Storage temperature
-65
150
ICS571 Features
• Packaged in 8 pin SOIC. • Can function as low phase noise x2 multiplier. • Low skew outputs. One is ÷2 of other. • Input clock frequency up to 160 MHz at 3.3V. • Phase noise of better than -100 dBc/Hz from 1kHz to 1MHz offset from carrier • Can recover poor input clock duty cycle. • Output clock duty cycle of 45/55 at 3.3V. • High drive strength for >100 MHz outputs. • Full CMOS clock swings with 25mA drive capability at TTL levels. • Advanced, low power CMOS process. • Operating voltages of 3.0 to 5.5 V.