Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The ILC7083/ILC7084 is a 150mA low dropout (LDO) voltage regulator designed to provide a high performance solution to low power systems. The device offers a typical combination of low dropout and low quiescent current expected of CMOS parts, while uniquely providing the low noise and high ripple rejection characteristics usually only associated with bipolar LDO regulators.
The device has been optimized to meet the needs of modern wireless communications design; Low noise, low dropout, small size, high peak current, high noise immunity.
The ILC7083/ILC7084 is designed to make use of low cost ceramic capacitors while outperforming other devices that require tantalum capacitors.
As opposed to ILC7084, the ILC7083 has a built in output discharge circuit active in shutdown mode. This feature is necessary in applications where the output voltage must decrease quickly to zero volt in shutdown mode.
ILC7084 Maximum Ratings
Parameter
Symbol
Ratings
Units
Input Voltage On/Off Input Voltage
VIN VON/OFF
-0.3 to +13.5 -0.3 to VIN
V
Output Current
IOUT
Short circuit protected
mA
Output Voltage
VOUT
-0.3 to VIN + 0.3
V
Package Power Dissipation (SOT-23-5)
PD
250 (Internally Limited)
mW
Maximum Junction Temp Range
TJ(max)
-40 to +150
Storage Temperature
TSTG
-40 to +125
Package Thermal Resistance
JA
333
/W
ILC7084 Features
•Ultra low 1mV dropout per 1mA load •3% output voltage accuracy •Only 40V RMS noise •Uses low ESR ceramic output capacitor to minimize noise and output ripple •Only 100A ground current at 100mA load •Ripple rejection up to 85dB at 1kHz, 60dB at 1MHz •Excellent line and load transient response •Over current / over temperature protection •Guaranteed to 150mA output current •Industry standard five lead SOT-23 package •Fixed 2.5V, 2.7V, 2.85V, 3.0V, 3.3V, 3.6V, 5V output voltage for ILC7083 and adjustable output voltage for ILC7083/ILC7084 •Metal mask option available for custom voltages between 2.5V and 5.1V