Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The Intersil ISL4486 and ISL81486 are BiCMOS, 5V powered, single transceivers that meet both the RS-485 and RS-422 standards for balanced communication, and feature the larger output voltage and higher data rate - up to 40Mbps - required by high speed PROFIBUS applications. Unlike competitive products, these Intersil devices are specified for 10% tolerance supplies (4.5V to 5.5V) and deliver at least a 2.3V differential output voltage over this supply range. At the 5% tolerance specified by many competitors, the ISL4486 delivers an unsurpassed 2.5V differential signal into a 54Ω total load. This translates into longer reach, or better data integrity, at the exceptional 40Mbps data rate. SCSI applications benefit from the ISL4486s low receiver and transmitter part-to-part skews, which make it perfect for high speed parallel applications where large numbers of bits must be simultaneously captured. The low bit-to-bit skew eases the timing constraints on the data latching signal. These devices present a 0.6 unit load to the RS-485 bus, which allows up to 50 transceivers on the network. Receiver (Rx) inputs feature a fail-safe if open design, which ensures a logic high Rx output if Rx inputs are floating. Driver (Tx) outputs are short circuit protected, even for voltages exceeding the power supply voltage. Additionally, on-chip thermal shutdown circuitry disables the Tx outputs to prevent damage if power dissipation becomes excessive.
• Specified for 10% Tolerance Supplies • High Data Rates ISL4486. . . up to 40Mbps ISL81486. . . up to 30Mbps • Large Differential Output Voltage . . . . . . . . . . 3V into 54 • Low Bit-to-Bit (Part-to-Part) Skew for Parallel Applications • 0.6 Unit Load Allows up to 50 Devices on the Bus • ISL81486 is a Drop-In Replacement for the ADM1486 • Low Quiescent Current . . . . . . . . . . . . . . . . . . . . . 800A • -7V to +12V Common Mode Input Voltage Range • Three-State Rx and Tx Outputs • 14ns (Max) Propagation Delays, 2ns (Max) Skew • Operates from a Single +5V Supply (10% Tolerance) • Current Limiting and Thermal Shutdown for driver Overload Protection • Pb-free available
ISL4486 Typical Application
• SCSI "Fast 40" Drivers and Receivers • PROFIBUS DP and FMS Networks • Factory Automation • Field Bus Networks • Security Networks • Building Environmental Control Systems • Industrial/Process Control Networks