Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The device is a high voltage half bridge driver with built-in oscillator. The frequency of the oscillator can be programmed using external resistor and capacitor.
The output drivers are designed to drive external n-channel power MOSFET and IGBT. The internal logic assures a minimum dead time to avoid cross-conduction of the power devices.
L6571A Maximum Ratings
Symbol
Parameter
Value
Unit
IS (*)
Supply Current
25
mA
VCF
Oscillator Resistor Voltage
18
V
VLVG
Low Side Switch Gate Output
14.6
V
VOUT
High Side Switch Source Output
-1 to VBOOT - 18
V
VHVG
High Side Switch Gate Output
-1 to VBOOT
V
VBOOT
Floating Supply Voltage
618
V
VBOOT/OUT
Floating Supply vs OUT Voltage
18
V
dVBOOT/dt
VBOOT Slew Rate (Repetitive)
± 50
V/ns
dVOUT/dt
VOUT Slew Rate (Repetitive)
± 50
V/ns
Tstg
Storage Temperature
-40 to 150
°C
Tj
Junction Temperature
-40 to 150
°C
Tamb
Ambient Temperature (Operative)
-40 to 125
°C
(*) The device has an internal zener clamp between GND and VS(typical 15.6V). Therefore the circuit should not be driven by a DC low impedance power source.
Note: ESD immunity for pins 6, 7 and 8 is guaranteed up to 900 V (Human Body Model)
L6571A Features
`TECHNOLOGY: BCD "OFF-LINE" `FLOATING SUPPLY VOLTAGE UP TO 600V `GND REFERRED SUPPLY VOLTAGE UP TO 18V `DRIVER CURRENT CAPABILITY: - SINK CURRENT = 270mA - SOURCECURRENT = 170mA `VERYLOW START UP CURRENT: 150A `VERYLOW OPERATING CURRENT: <2mA `UNDERVOLTAGE LOCKOUT `PROGRAMMABLE OSCILLATOR FREQUENCY `dV/dt IMMUNITY UP TO ± 50V/ns