Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The MM74HCT240 and MM74HCT244 3-STATE buffers utilize advanced silicon-gate CMOS technology and are general purpose high speed inverting and non-inverting buffers. They possess high drive current outputs which enable high speed operation even when driving large bus capacitances. These circuits achieve speeds comparable to low power Schottky devices, while retaining the low power consumption of CMOS. All three devices are TTL input compatible and have a fanout of 15 LS-TTL equiva-lent inputs.
MM74HCT devices are intended to interface between TTL and NMOS components and standard CMOS devices. These parts are also plug-in replacements for LS-TTL devices and can be used to reduce power consumption in existing designs.
The MM74HCT240 is an inverting buffer and the MM74HCT244 is a non-inverting buffer.Each device has two active low enables (1G and 2G), and each enable inde-pendently controls 4 buffers.
All inputs are protected from damage due to static dis-charge by diodes to VCC and Ground.
MM74HCT240 Maximum Ratings
Supply Voltage (VCC ) -0.5V to+7.0V DC Input Voltage (VIN) -1.5 to Vcc + 1.5V DC Output Voltage (VOUT) -0.5 to Vcc + 0.5V Clamp Diode Current (IIK , IOK ) ±20 mA DC Output Current, per pin (IOUT ) ±35 mA DC VCC or GND Current, per pin (ICC) ±70 mA Storage Temperature Range (TSTG ) -65 to,150 Power Dissipation (PD ) (Note 3) 600 mW S.O. Package only 500 mW Lead Temperature (TL) (Soldering 10 seconds) 260°C
MM74HCT240 Features
TTL input compatible Typical propagation delay: 14 ns 3-STATE outputs for connection to system buses Low quiescent current: 80 A High output drive current: 6 mA (min)