Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
1.50" L x 0.82" W x 0.29" H (38.10mm x 20.83mm x 7.24mm)
Millicandela Rating
-
Configuration
-
Voltage - Forward (Vf) Typ
-
Internal Connection
-
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
PD4437 PD4437 475 1424 ND 4751424ND 475-1424
PD4437 General Description
These Programmable Displays are four digit display system modules. The characters are 0.20" by 0.14"(PD243X), 0.27" by 0.20" (PD353X), and 0.45" by 0.27"(PD443X) 5x7 dot matrix arrays constructed with the latest solid state technology in light emitting diodes. Driving and controlling the LED arrays is a silicon gate CMOS integrated circuit. This integrated circuit provides all necessary LED drivers and complete multiplexing control logic.
Additionally, the IC has the necessary ROM to decode 128 ASCII alphanumeric characters and enough RAM to store the display's complete four digit ASCII message with special attributes. These attributes, all software rogrammable at the user's discretion, include a lamp test,brightness control, displaying cursors, alternating cursors and characters, and flashing cursors or characters.
The CMOS IC also incorporates special interface control circuitry to allow the user to control the module as a fully supported microprocessor peripheral. The module,under internal or external clock control, has asynchronous read, write, and memory clear over an eight bit parallel,TTL compatible, bi-directional data bus. Each module is fully encapsulated within a package 1.0" x 0.7" x 0.2" (PD253X), 1.4" x 0.72" x 0.285" (PD353X), and 1.5"x 0.82" x 0.285" (PD443X). The standard 20 pin DIP construction with two rows spaced at 0.6" on 0.1" centers is wave solderable.
See the end of this data sheet or refer to Appnotes 18,19, 22, and 23 for further details on handling and assembling Siemens Programmable Displays.
PD4437 Maximum Ratings
DC Supply Voltage.................................................. 0.5 V to +7.0 Vdc Input Voltage Relative to GND (all inputs)....... 0.5 V to VCC +0.5 Vdc Operating Temperature PD243X/353X......................... 40 to +85 PD443X......................................................................... 40to +70 Storage Temperature................................................. 40 to +100 Maximum Solder Temperature, .063" (1.59 mm) below Seating Plane, t<5 sec. .................................................... 260
PD4437 Features
• Four Dot Matrix Characters in High Efficiency Red,Red, and Bright Green PD2435/6/7, 0.200" High PD3535/6/7, 0.270" High PD4435/6/7, 0.45" High • Built-in Memory, Decoders, Multiplexer and Drivers • Wide Viewing Angle, X Axis ±55°, Y Axis±65° • Categorized for Luminous Intensity • 128 Character ASCII Format (Upper and Lower Case Characters) • 8 Bit Bidirectional Data BUS • READ/WRITE Capability • Dual In-Line Package Configuration, 0.600" Wide,0.100" Pin Centers • End-Stackable Package • Internal or External Clock PD243X PD353X PD443X • Built-in Character Generator ROM • TTL Compatible • Easily Cascaded for Multidisplay Operation • Less CPU Time Required • Software Controlled Features: Programmable Highlight Attribute (Blinking, Non-Blinking) Asynchronous Memory Clear Function Lamp Test Display Blank Function Single or Multiple Character Blinking Function Programmable Intensity Three Brightness Levels • Extended Operating Temperature Range: PD243X, PD353X: 40 to +85 PD443X: 40 to +70