Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
*1 60Hz sine wave, Tj = 25°C start withstand voltage tester with zero-cross circuit. (Input and output shall be shorted respectively) .(Note) When the isolation voltage is necessary at using external heat sink, please use the insulation sheet.(Need of the insulation sheet when mounting external heat sink ) 1. Comforms to European Safety Standard (EN60950) *2 AC 60Hz for 1 minute, 40 to 60% RH, Apply voltages between input and output by the dielectric *3 For 10 seconds *4 TC<=80°C *5 TC<=60°C
S202SE1 Features
1. Comforms to European Safety Standard (EN60950) (Need of the insulation sheet when mounting external heat sink ) Internal insulation distance : 0.4mm or more Creepage distance : 5mm or more Space distance : 4mm or more 2. RMS ON-state current S202SE1 / S202SE2 : 8Arms at Tc <= 80°C ( with heat sink) S216SE1 / S216SE2 : 16Arms at Tc <= 60°C ( with heat sink) 3.Isolation voltage. .between input and output (V : 3 000V) 4. Approved by TUV, No. R9051479 5. Recognized by UL, No. E94758 (S202SE1/ S202SE2) Approved by CSA, No. LR63705 (S202SE1, S202SE2 )
*1 60Hz sine wave, Tj = 25°C start withstand voltage tester with zero-cross circuit. (Input and output shall be shorted respectively) .(Note) When the isolation voltage is necessary at using external heat sink, please use the insulation sheet.(Need of the insulation sheet when mounting external heat sink ) 1. Comforms to European Safety Standard (EN60950) *2 AC 60Hz for 1 minute, 40 to 60% RH, Apply voltages between input and output by the dielectric *3 For 10 seconds *4 TC<=80°C *5 TC<=60°C
S202SE2 Features
1. Comforms to European Safety Standard (EN60950) (Need of the insulation sheet when mounting external heat sink ) Internal insulation distance : 0.4mm or more Creepage distance : 5mm or more Space distance : 4mm or more 2. RMS ON-state current S202SE1 / S202SE2 : 8Arms at Tc <= 80°C ( with heat sink) S216SE1 / S216SE2 : 16Arms at Tc <= 60°C ( with heat sink) 3.Isolation voltage. .between input and output (V : 3 000V) 4. Approved by TUV, No. R9051479 5. Recognized by UL, No. E94758 (S202SE1/ S202SE2) Approved by CSA, No. LR63705 (S202SE1, S202SE2 )