Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The TK5561A-PP is a complete transponder integrating all important functions for immobilizer and identification systems. It consists of a plastic cube which accommodates the crypto IDIC e5561A and the antenna realized as tuned LC-circuit. The TK5561A-PP is a R/W crypto transponder for applications which demand higher security levels than those which standard R/W transponders can fulfil. For this reason, the TK5561A-PP has an additional encryption algorithm block which enables a base station to authenticate the transponder. Any attempt to fake the base station with a wrong transponder will be recognized immediately. For authentication, the base station transmits a challenge to the TK5561A-PP. This challenge is encrypted by both the IC and the base station. Both should possess the same secret key. Only then can the results be expected to be equal.
For detailed technical information about functions, configurations etc., please refer to the e5561 data sheet.
TK5561A-PP Maximum Ratings
Parameter
Symbol
Value
Unit
Operating temperature range
Tamb
-40 to +85
Storage temperature range
Tstg
-40 to +125
Maximum assembly temperature, t < 5 min
Tass
170
Magnetic field strength at 125 kHz
Hpp
1000
A/m
TK5561A-PP Features
• 65 ms Cycle Time for Crypto Algorithm Programming • Encryption Time < 10 ms, < 30 ms Optional • Identification Transponder in Plastic Cube • Contactless Read/Write Data Transmission • High-security Crypto Algorithm Optional • Inductive Coupled Power Supply at 125 kHz • Basic Component R/W e5561 IDIC® • Built-in Coil and Capacitor for Circuit Antenna • Starts with Cyclical Data Read Out • Self-adapting Resonance Frequency (Optional) • 128-bit User-programmable EEPROM • Typical < 50 ms to Write and Verify a Block • Read/Write Protection by Lock Bits • Options Set by EEPROM: Bit Rate (Bit/s): Rf/32, Rf/64 Modulaton: Manchester, Biphase
TK5561A-PP Typical Application
• Car Immobilizers with Higher Security Level • High-security Identification Systems