Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The TPIC46L01, TPIC46L02, and TPIC46L03 are low-side predrivers that provide serial input interface and parallel input interface to control six external field-effect transistor(FET) power switches such as offered in the TI TPIC family of power arrays. These devices are designed primarily for low-frequency switching, inductive load applications such as solenoids and relays. Fault status for each channel is available in a serial-data format. Each driver channel has independent off-state open-load detection and on-state shorted-load/short-to-battery detection. Battery overvoltage and undervoltage detection and shutdown are provided. Battery and output load faults provide real-time fault reporting to the controller. Each channel also provides inductive-voltage-transient protection for the external FET.
These devices provide control of output channels through a serial input interface or a parallel input interface. A command to enable the output from either interface enables the respective channel GATE output to the external FET. The serial input interface is recommended when the number of signals between the control device and the predriver must be minimized, and the speed of operation is not critical. In applications where the predriver must respond very quickly or asynchronously, the parallel input interface is recommended.
6-Channel Serial-in/Parallel-in Low-side Pre-FET Driver Device Can Be Cascaded Internal 55-V Inductive Load Clamp and VGS Protection Clamp for External Power FETs Independent Shorted-Load/Short-to-Battery Fault Detection on All Drain Terminals Independent Off-State Open-Load Fault Sense Over-Battery-Voltage Lockout Protection and Fault Reporting Under-Battery-Voltage Lockout Protection for TPIC46L01 and TPIC46L02 Asynchronous Open-Drain Fault Flag Device Output Can be Wire-ORed with Multiple External Devices Fault Status Returned Through Serial Output Terminal Internal Global Power-on Reset of Device High-Impedance CMOS Compatible Inputs With Hysteresis TPIC46L01 and TPIC46L03 Disables the Gate Output When a Shorted-Load Fault Occurs TPIC46L02 Transitions the Gate Output to a Low-Duty-Cycle PWM Mode When a Shorted-Load Fault Occurs