Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The ac-unit power supply with low side drive output provides regulated 5-V output to power the system microcontroller and drive up to eight inductive and/or resistive loads. The ac zero detect circuitry is monitoring the cross-over voltage of the mains ac supply. The resultant signal is a low frequency clock output on the ZVS terminal based on the ac line cycle. This information allows the microcontroller to reduce inrush current by powering loads on the ac-line peak voltage.
A serial communications interface controls the eight low side outputs; each output has an internal snubber circuit to absorb the energy in the inductor at turn OFF. Alternatively, the system can place a fly-back diode to VIN to help recirculate the energy in an inductive load at turn OFF.
TPIC9201N Maximum Ratings
VIN
Unregulated input(3) (4)
24V
SYN
Unregulated input(3) (4)
24V
EN1, MOSI, SCLK, and NCS
Logic inputs(3) (4)
7V
RST and Rdelay
See (3) and (4)
7V
OUT(1:8)
Low side outputs
20V
JC
Thermal impedance junction-to-case(5)
67°C/W
JA
Thermal impedance junction-to-ambient(5)
137°C/W
PD
Continuous power dissipation
0.912 W
ESD
Electrostatic discharge(6)
2 kV
TOP
Operating ambient temperature range
40°C to 85°C
TS
Storage temperature range
65°C to 125°C
TLEAD
Lead temperature (Soldering, 10 sec)
260°C
TPIC9201N Features
Eight Low-Side Drivers With Internal Clamp for Inductive Loads and Current Limiting for Self Protection Seven Outputs are Rated at 150 mA and Controlled Through the Serial Interface One Output Rated at 150 mA and is Controlled Through Serial and/or Parallel Input 5-V ±5% Regulated Power Supply With 200-mA Load Capability at VIN Max of 18 V Internal Voltage Supervisory for the Regulated Output Serial Communications for Control of Eight, Low Side Drivers Enable/Disable Input for Out1 5 V or 3.3 V, I/O Tolerant for Interface to Microcontroller Programmable Power On Reset Delay Before RST is Asserted High, Once the 5 V is Within Specified Range (Typically 6 ms) Programmable De-glitch Timer Before nRST is Asserted Low (typically 40 µs) Zero Voltage Detection Signal With Built in Filter of 20 µs Thermal Shutdown for Self Protection