Want to post a buying lead? If you are not a member yet, please select the specific/related part number first and then fill the quantity and your contact details in the "Request for Quotation Form" on the left, and then click "Send RFQ".Your buying lead can then be posted, and the reliable suppliers will quote via our online message system or other channels soon.
The W83320S is a high-speed, N-Channel synchronous buck regulator controller optimized for wide reference input range. The W83320S employs adjustable frequency ranging from 100 KHz to 400 KHz voltage-mode PWM control architecture. The regulator is biased from a 5V rail and the power for the high-side MOSFET can be supplied by a separate 12V rail or supplied from the internal charge pump.
A Current limit protection is implemented by monitoring the voltage drop across the switch ON resistance of the low-side MOSFET. This method can eliminate the requirement of extra current sensing resistor and avoids false trigger of OC protection when VIN varies efficiently. The adaptive non-overlapping MOSFET gate drivers help avoid potential shoot-through problems while maintaining high efficiency. All these together with Power-good flag, enable and soft start features make power sequencing easy.
W83320S Features
·1.8V to 5V power stage input voltage ·Providing +/-1.5% reference voltage ·Power Good flag ·Current limit without sense resistor ·Soft start ·Switching frequency from 100 kHz to 400 kHz ·Tiny plastic SOP-14 package
W83320S Typical Application
· DDR SDRAM and AGP core power for Desktop PC · Set-Top Boxes/ Home Gateways · Core Logic Regulators · High-Efficiency Buck Regulation
W83320S Connection Diagram
W83321G Parameters
Technical/Catalog Information
W83321G
Vendor
Nuvoton Technology Corporation of America
Category
Integrated Circuits (ICs)
Type
Step-Down (Buck)
Number of Outputs
1
Voltage - Input
5V
Voltage - Output
0.8 ~ 5 V
Current - Output
-
Power - Output
-
Package / Case
8-SOIC
Packaging
Tube
Internal Switch(s)
No
Synchronous
Yes
Rds (On)
-
Operating Temperature
0°C ~ 70°C
Frequency - Switching
250kHz
Lead Free Status
Lead Free
RoHS Status
RoHS Compliant
Other Names
W83321G W83321G
W83321G General Description
The W83321S is a high-speed, N-Channel synchronous buck regulator controller. The W83321S employs fixed-frequency voltage-mode PWM control architecture. Both high-side and low-side MOSFETs are lower cost N-Channel type. The regulator is biased from a 5V rail and the power for the high-side MOSFET can be supplied by a separate 12V rail or supplied from a local charge pump.
Current limit is achieved by monitoring the voltage drop across the on resistance of the low-side MOSFET. This method eliminates the requirement of extra current sensing resistor and avoids false trigger of OC protection when VIN varies. The adaptive non-overlapping MOSFET gate drivers help avoid potential shoot-through problems while maintaining high efficiency.
W83321G Features
Operates from +5V Input 0.8V to VIN Output Range - 0.8V Internal Reference - ±1.5% Over Line Voltage and Temperature Drives N-Channel MOSFETs Simple Single-Loop Control Design - Voltage-Mode PWM Control Fast Transient Response Lossless, Programmable Overcurrent Protection - Uses Lower MOSFET's Rds (on) - Current limit without sense resistor Small Converter Size - 250 kHz Fixed Frequency Oscillator - Internal Soft Start - Tiny plastic SOP-8 package
W83321G Typical Application
Motherboard Power Supplies Regulation Subsystem Power Supplies - PCI/AGP/GTL+ Buses - ACPI Power Control - SSTL-2 and DDR SDRAM Bus Termination Supply Cable Modems, Set Top Boxes, and DSL Modems DSP and Core Communications Processor Supplies Memory Power Supplies Personal Computer Peripherals Industrial Power Supplies 5V-Input DC-DC Regulators Low-Voltage Distributed Power Supplies
W83321G Connection Diagram
W83321S General Description
The W83321S is a high-speed, N-Channel synchronous buck regulator controller. The W83321S employs fixed-frequency voltage-mode PWM control architecture. Both high-side and low-side MOSFETs are lower cost N-Channel type. The regulator is biased from a 5V rail and the power for the high-side MOSFET can be supplied by a separate 12V rail or supplied from a local charge pump.
Current limit is achieved by monitoring the voltage drop across the on resistance of the low-side MOSFET. This method eliminates the requirement of extra current sensing resistor and avoids false trigger of OC protection when VIN varies. The adaptive non-overlapping MOSFET gate drivers help avoid potential shoot-through problems while maintaining high efficiency.
W83321S Features
Operates from +5V Input 0.8V to VIN Output Range - 0.8V Internal Reference - ±1.5% Over Line Voltage and Temperature Drives N-Channel MOSFETs Simple Single-Loop Control Design - Voltage-Mode PWM Control Fast Transient Response Lossless, Programmable Overcurrent Protection - Uses Lower MOSFET's Rds (on) - Current limit without sense resistor Small Converter Size - 250 kHz Fixed Frequency Oscillator - Internal Soft Start - Tiny plastic SOP-8 package
W83321S Typical Application
Motherboard Power Supplies Regulation Subsystem Power Supplies - PCI/AGP/GTL+ Buses - ACPI Power Control - SSTL-2 and DDR SDRAM Bus Termination Supply Cable Modems, Set Top Boxes, and DSL Modems DSP and Core Communications Processor Supplies Memory Power Supplies Personal Computer Peripherals Industrial Power Supplies 5V-Input DC-DC Regulators Low-Voltage Distributed Power Supplies